22" x 22" Outdoor Cushions – Custom Made to Your Exact Size

Every dimension — width, depth, thickness — is cut to what you measure, not to a size chart. No middleman, no minimum.

See the full cushion size chart — every standard size and its typical frames at a glance.

22 x 22 outdoor cushions — wide square replacement pads for wicker armchairs

Start with your shape

Not sure? Pick the closest — every measurement is confirmed before we cut.

Don't see your shape? We make any shape.

Straight edges? A top photo + the edge numbers is all we need. Curved? Trace it on paper next to a tape measure and email us a photo.

Enter your measurements

Measure the old cushion flat, edge to edge — never the frame.

Units in — decimals (23.5) or fractions (23 1/2)
Your cushion drawing appears here as you type.

Choose your fabric

Five families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.

Use:
Pattern:

All covers cut to your exact dimensions — no stock sizes, zippered covers that remove for washing.

Review & order

Calculated live from your measurements — every line, no surprises.

Price breakdown

Free shipping over $158 · $29 flat below

Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote

Your cushion
Your configuration
Photo (optional)

Odd shape or tricky frame? Upload a photo of your furniture or old cushion — one overall shot, plus a top and side view of the old cushion if you can.

JPG, PNG or WebP · up to 10 MB each · max 3

Factory Direct

The workshop that cuts it is the one that ships it

119 Fabrics

Every fabric on the list, open in the configurator

±½″ Tolerance

Measured cuts, not stock-chart guesses

Remake Free

Miss on our side and the remake is free

Build Your 22 x 22 Cushion

The 22-inch square is the quiet standard of mid-size outdoor seating — conversation-set seats, compact deep-seating chairs, and plenty of wicker frames built in the 2010s. Twenty-two is also where factory numbers stop agreeing: our library shows originals ranging from 22 to 22.75 inches on nominal “22 inch” pieces, and three-quarters of an inch of error is the difference between a pad that sits tailored and one that rides up at the corners every time someone stands.

Every 22 x 22 outdoor cushion we make is cut to your tape measure, not a stock chart. Choose 3.5 to 5 inches of thickness to match your seat height and pick from three fabric families led by Tech Fabric, our waterproof, wipe-clean leather-like outdoor workhorse. Documented near-matches include the Cedar Island recliner seat (22.75 x 21.5) and the Kampar dining chair’s integrated 22 x 22 pad — check the series charts linked below before you order.

Pricing — estimated starting at

Foam densityEstimated price*
35D foam$145
50D foam$148
65D foam$159

*One cushion, 22 × 22 in. (3.36 sq ft top surface): $45 make-base + 3.36 sq ft × combined foam + fabric rate ($29.81/sq ft in 35D, $30.79 in 50D, $33.80 in 65D, each at the 5-inch default). Fabric choice never moves the number — all 119 sit at one price, and the from-128 entry runs 35D at the thinnest 2-inch cut. You settle thickness at checkout; every dimension comes back to you for confirmation before cutting.

For comparison: U.S. custom-configurator specialists’ 2026 listings for made-to-order cushions in common sizes (16×16 through 24×24) run roughly $71–$119 before shipping — and most only reveal that price after a quote request. The pricing math is right on the page — every dollar of the estimate traces back to a dimension you can measure.

Fits these furniture series

SeriesPiecePartFactory size (W × D × T)
Santa RosaLounge ChairSeat22 × 23 × 5 in. measured
Cedar IslandReclinerSeat22.75 × 21.5 × 4 in. measured
Lake Adele6-Piece SetSeat23 × 23 × 5 in. measured
Lake AdeleChat ChairBack21 × 21 × 2.5 in. measured
Lake AdeleLounge ChairSeat23 × 23 × 5 in. measured
Pacific GroveDining ChairSeat21 × 21 × 3.5 in. measured
Palm CanyonFirepit ChairBack23 × 21 × 5 in. measured
PembreyLounge ChairBack23 × 20.5 × 5 in. measured
PembreyLoveseatBack23 × 20.5 × 5 in. measured
KamparLounge ChairBack22.5 × 22 × 5 in.
KamparDining ChairSeat + Back22 × 22 × 3 in.
POÄNGOttomanSeat21.25 × 21.25 in., thickness per your old pad

A match means width and depth each land within 1.5 in. of 22 x 22. The charts draw on our measurement library of factory-original pieces and supplier documents. Your order’s dimensions are re-checked before cutting. We are not affiliated with any brand named on this page; names identify fit.

Exact fit in any size — get an instant quote.

Mismatch with the chart? The chart loses — your measurements win.

Measuring tips for a 22 x 22

Premium Olefin - Orange
  • With the old cushion on a flat surface, take width edge-to-edge, depth front-to-back, and thickness along the seam line. Never measure a pad while it is squeezed.
  • On wicker frames, measure the old pad at the stitching, not the wicker edge — weave bulge adds false width.
  • Write fractions as decimals: 22¾ becomes 22.75. We cut to the quarter inch.

The complete walkthrough, photographed step by step: How to Measure (and Identify) Your Cushions.

Fabrics that suit a 22 x 22

The tier logic is exposure: Tech Fabric open-air, Cotton Linen covered, Premium Velvet indoor. Loveseat blocks order in pairs from one run — adjacent pads must match in loft and dye lot. Full comparison in the outdoor fabric guide.

Fabrics from the 119-option range, pictured — see all of them enlarged in the configurator before ordering.

Striped Canvas - Light brown

22 x 22 on sectionals and corner blocks

Foam thickness for a 22 x 22

Twenty-two inch squares bridge dining and lounge — wide dining chairs, compact wicker loungers, loveseat seat blocks. Thickness: 3 inches upright, 4–5 lounging. Two-block loveseats run this square per seat; joined decks run one wide pad instead — replace like with like.

Density: 35D occasional, 50D daily, 60D nap-grade lounge. Grade, thickness and dimensions confirmed together in writing.

Sectionals are the pieces most often mis-ordered as “a few square cushions,” and 22-inch squares are common inside them. The build to understand: a sectional is not chairs — it is seat blocks, a corner wedge, maybe a chaise end, and a run of backs, each a separate cut with its own depth. Seat blocks at 22 run front-to-back depths of 22–24 on compact sectionals; the corner wedge runs roughly 27 × 27 with a diagonal front and two distinct depths where the arms meet; the chaise end is one long rectangle or an L cut as a single piece.

The ordering rule that saves remakes: count and name every block before measuring any of them. A seven-piece sectional is four seats, one wedge, two backs — or it is three seats and an L — and the piece list, not the seat count, is what the cutting form needs. Backs run the seat width at 4–7 inches of loft and often a wedge profile; they belong in the same fabric run as the seats. The block-by-block method, with the corner and chaise geometry, is laid out on the sectional cushions page.

The 22-inch neighborhood

Twenty-one and twenty-three are both live sizes, and the library’s originals at “22” actually run 22 to 22.75 — the Cedar Island recliner seat at 22.75 × 21.5 sits inside the tolerance, but ordering its true numbers is the better cut. Wicker dining squares run 19–21, one inch down; compact lounge modules run 20–23 per seat, with 22 the midpoint. If your tape says 21.5 or 22.5, that is the order — the family pages (21 x 21, 22 x 24, 23 x 23) exist for the near sizes, and every one cuts to quarter-inch entries at the same formula. Up the square ladder, 30 x 30 is the daybed-scale square, cut on the same terms.

A few from the 119-fabric lineup — review the full set, zoomed, in the configurator first.

Frequently asked questions

The Cedar Island recliner seat is 22.75 x 21.5 inches — inside our ¾″ tolerance, but the better move is to order those exact numbers. Enter what you measured and we sew to it.
Three fabric families, at every size — all one price: Tech Fabric, our waterproof, wipe-clean leather-like weave — the outdoor workhorse; Cotton Linen, a durable everyday weave with no pilling, shrinking, or fading, best under covered patios and indoors; and Premium Velvet, plush high-density velvet with a claw-resistant weave for indoor luxury. A 16-inch square gets the same fabrics as a 60-inch bench pad.

Every cover here unzips — cleaning can be a cloth in hand or a full wash cycle. On ease, Tech Fabric wins: a waterproof surface wiped down damp. Cotton Linen answers to spot cleaning and a low-heat iron from the back. Velvet suits dry cleaning or a careful hand wash, with the pile brushed flat to dry; Chenille is strictly spot-clean, tufts left alone. All 119 options sit in the configurator, zoomable before you order.

Both use it: compact lounge chairs and two-block loveseats run 20–23 inch squares per seat. Pull the old cushion — one piece or two — and match the build; the loveseat cushions page covers joined-deck builds.
Yes — front and back widths measured separately; more than half an inch apart is a trapezoid cut at the same formula price. The wicker-specific method is on the wicker cushions page.
They cost their own area — a corner wedge’s footprint prices like any piece its size, at the same per-square-foot formula as the seats. What corners cannot do is share a cutting line with the seats: two depths, a diagonal front, and a template-worthy angle make it its own piece on the form, not a square with a corner knocked off.

Made and shipped by the same hands

Custom 22 x 22 cushions from $128 — four steps to a quote.

Ready when you are. Enter your measurements, pick your fabric and your finishing — every dimension comes back to you for confirmation before we cut. One cushion or a whole set, from the factory that ships them. Cut to within ½ inch of your confirmed numbers — outside tolerance, remade free.

Related pages

From the blog archive