21" x 21" Outdoor Cushions – Custom Made to Your Exact Size

Cut to your measurements — width, depth, and thickness — not to a stock chart. Factory-direct, no minimums.

Start with your shape

Not sure? Pick the closest — every measurement is confirmed before we cut.

Don't see your shape? We make any shape.

Trace your old cushion on paper, photograph it next to a tape measure, and email it to us — a Custom Template order is routine work here.

Enter your measurements

Measure the old cushion flat, edge to edge — never the frame.

Units in — decimals (23.5) or fractions (23 1/2)

Foam density How to choose density →

Your cushion drawing appears here as you type.

Choose your fabric

Six families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.

Use:

Pattern:

All covers sewn to your exact dimensions — no stock sizes, no zippers (sewn envelope closure).

Review & order

Calculated live from your measurements — every line, no surprises.

Price breakdown

Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote

Your cushion

Your configuration

Factory Direct

Source workshop, no middlemen

119 Fabrics

Free swatch program

±½″ Tolerance

Cut to your exact measurements

Remake Free

If we cut it wrong, remade free

Build Your 21 x 21 Cushion

Twenty-one square is the size nobody stocks and plenty of frames want — it sits between the 20 dining standard and the 22 lounge module, which is exactly where a lot of mid-range patio furniture was cut. Our library documents factory pieces at this square and its nearest sizes across six series, including a chat-chair back and a dining seat: the table below tells you if your set is one of them.

We cut every 21 x 21 outdoor cushion to your measurements — width, depth, thickness — in three fabric tiers: Tech Fabric, our leather-like waterproof weave that wipes clean — the outdoor workhorse; Cotton Linen, a durable everyday weave for covered patios and indoors; or Premium Velvet, plush claw-resistant velvet for indoor luxury. Three-and-a-half to four inches suits seat duty; backs at this square typically run thinner. Covers close with a sewn envelope closure; fit does the holding — a pad cut to your numbers sits the frame without wandering.

Close but not exactly 21 x 21? Type your numbers — decimals included — and the estimate updates as you go →

Pricing — estimated starting at

Fabric tier	Estimated price*
Cotton Linen	$98
Tech Fabric	$118
Premium Velvet	$144

*One cushion, 21 × 21 in. (3.06 sq ft top surface): $39 make-base + 3.06 sq ft × fabric rate ($19.0/sq ft, $25.5/sq ft, $34.0/sq ft). Thickness, foam density, and the sewn closure is confirmed at checkout — and every dimension is confirmed with you before we cut.

For comparison: U.S. custom-configurator specialists’ 2026 listings for made-to-order cushions in common sizes (16×16 through 24×24) run roughly $71–$119 before shipping — and most only reveal that price after a quote request. We publish the formula above so you can check the math before you order.

Fits these furniture series

Series	Piece	Part	Factory size (W × D × T)
Lake Adele	Chat Chair	Back	21 × 21 × 2.5 in. measured
Pacific Grove	Dining Chair	Seat	21 × 21 × 3.5 in. measured
Cedar Island	Dining Chair	Back	22 × 20 × 4.5 in. measured
Edington	Ottoman	Ottoman	22 × 20 × 5 in. measured
Cedar Island	4-Piece Set	Back	22 × 19.5 × 5 in. measured
Cedar Island	Loveseat	Back	22 × 19.5 × 5 in. measured
Cedar Island	Swivel Lounge Chair	Back	22 × 19.5 × 5 in. measured
Charlottetown	Patio Recliner	Back	22 × 19.5 × 5 in. measured
Charlottetown	Rocker Chair	Seat	19.75 × 19.5 × 4 in. measured
POÄNG	Ottoman	Seat	21.25 × 21.25 × ? (pending verification)

Matching tolerance: width and depth each within 1.5 in. of 21 x 21. Entries marked measured are factory-original pieces from our measurement library; entries marked (pending verification) await re-measurement. Every dimension is re-verified against your order before we cut. We are not affiliated with the brands listed — names are used for fit identification.

Exact fit in any size — get an instant quote.

Yours differs? That’s the point — we cut to your numbers.

Measure your 21 x 21 seat

Old cushion flat on a table: width edge to edge, depth front to back, thickness seam to seam — never squeezed.
No old cushion? Measure the seat deck between the frame rails and arms, and send the raw numbers rather than rounding.
Photograph the label under the frame first — a model number can match you to a documented series chart in seconds.

Full walkthrough with photos: How to Measure (and Identify) Your Cushions.

Fabric choices at 21 x 21

Wicker and metal cafe frames at 21 inches spend their summers in full sun — Tech Fabric is the default for open sets, Cotton Linen for covered, Premium Velvet for indoor nooks. The tier logic and climate breakdown are in the outdoor fabric guide.

From the 119-fabric swatch library — free samples ship with every quote.

When 21 x 21 buyers shop — and why it matters

Thickness & Foam for a 21 x 21

Twenty-one inch squares sit between dining and lounge — wide dining chairs, compact loungers, wicker cafe sets. Thickness splits the same way: 3 inches for upright dining frames, 4–5 where the chair leans back. The recline angle matters more than people expect — a pad on a tilted deck slides forward, so an exact-fit cut matters as much as thickness — and a thin non-slip rug pad trimmed slightly smaller than the cushion, laid flat underneath, helps if the frame gets dragged around.

Density at this size: 35D for occasional sets, 50D for daily use, with the high grades better spent on true lounging furniture. Grade and dimensions are confirmed together in writing before cutting.

Searches for this square do not spread evenly across the year: they climb through spring, peak hard in May, and run two to four times their winter floor through summer. The furniture explains the shape — cushions discovered dead during the first warm-weather scrub-up, frames dragged out of the garage and found sun-bleached, guests scheduled and seats needed. The pattern repeats every year with the reliability of the weather that causes it.

What the season means for an order: production runs on queue depth, and May is the deepest queue of the year. An order placed in March cuts in days; the same order in mid-May waits behind everyone else’s scrub-up. If you are reading this in spring with summer plans, the honest advice is to measure now and order now — the seven-to-fourteen-business-day production clock starts when the order lands, and every week of May adds queue to the front of it.

Between 20 and 22

Twenty-one sits alone between two heavy sizes — 20 x 20 is the patio default and 22 x 22 the compact-lounge module — and frames split accordingly. Wicker dining chairs run 19–21 squares with 21 the top of the run; chat chairs and mid-range lounge modules take it as a true 21; the library holds a chat-chair back, a dining seat, and an ottoman at this square within a half inch. If your tape reads 20.5 or 21.5, order that — the rounding trap bites hardest on the odd squares, where a half inch one way lands you in a different family’s stock chart and a quarter inch the other is the difference between tailored and riding up at the corners.

A draw from the 119-fabric swatch library — free samples ship with every quote.

Frequently asked questions

Is 21 x 21 close enough to 22 x 22?

An inch of gap on a square pad shows — order what you measured. 21.25 costs the same as 21 here, and fits like it should.

Which pieces run 21 x 21 in the library?

A chat-chair back, a dining seat, and an ottoman top — see the table above with exact factory dimensions and series links.

What thickness for a 21 x 21 seat cushion?

3.5″–4″ for seat duty; 2.5″–3″ if it’s a back or ottoman pad. Match the old thickness to keep the geometry unchanged.

Is 21 x 21 a common wicker cushion size?

It is — wicker dining chairs commonly run 19–21 inch squares. If your frame is a named Home Depot line, the replacement library may hold its chart; the Cedar Island and Charlottetown pieces in our fits table below sit within a half inch of this square.

Can I get 21 x 21 pads with a trapezoid cut?

Yes — wicker decks taper wider at the front more often than any other frame type. Measure front and back widths separately; more than half an inch apart means a trapezoid cut, which is a standard option, not an upcharge.

How far ahead of summer should I order?

Production runs seven to fourteen business days as the normal clock — but the queue in front of it swells every May. Order by early spring for a painless cut; a June order still ships, it just waits behind the season’s scrub-up rush. Measure in winter, while the frame is idle, and the spring order is three clicks.

Made by the factory that ships them

Outdoor cushion factory for 10+ years — we cut, fill, and sew every order ourselves.
Every dimension you send is re-checked before a single yard of fabric is cut.
Made-to-order means any fabric, any piece, no minimum.
If we cut it wrong — outside the ±½″ tolerance (±¾″ over 36″), wrong fabric, wrong build — remade free.

Custom 21 x 21 cushions from $98 — quote in 4 steps.

Ready when you are. Enter your measurements, pick a fabric tier and your finishing — every dimension comes back to you for confirmation before we cut. One cushion or a whole set, from the factory that ships them. Cut to within ½ inch of your confirmed numbers — outside tolerance, remade free.