Hampton Bay Lounge Chair Cushions
Factory Direct — The workshop that cuts it is the one that ships it
119 Fabrics — Every fabric on the list, open in the configurator
18 Series Charted — Measured cuts, not stock-chart guesses
Free Remake — Miss on our side and the remake is free
Hampton Bay Lounge Chair Replacement Cushions — all 18 series charted (2026)
Every Hampton Bay series that uses a lounge chair, measured to OEM figures on one page — 18 series, seat and back sizes, and custom re-cuts in any of 119 fabrics.
The Hampton Bay lounge chair, at a glance
The lounge chair is the most widely shared piece across the Hampton Bay range — 18 of the 24 measured series ship one, and almost none of them share dimensions. Seat widths run 22 to 25.25 inches, seat depths 23 to 27, and thickness anywhere from 3.5 to 6 inches. That spread is why “universal” lounge pads disappoint: a 24 × 24 cushion on a 25.25 × 26.5 Edington frame slides, and a 6-inch Beverly pad on a Riley chair lifts your knees above the table.
Find your series in three steps: (1) read the white label under the seat frame or on the frame rail for the series name; (2) if the label is gone, match your tape numbers against the chart below; (3) still stuck — send a photo and we’ll identify it with you before anything is cut.
When the same name hides four different seats
“Lounge chair” on a Hampton Bay box covers everything from a slim 3.5-inch Riley pad to a 6-inch Beverly build. That 2.5-inch thickness gap changes seat height under your legs — ordering by name alone is the number-one cause of misfit replacements. The chart below lists thickness per series precisely because it varies this much.
Depth is the second trap. Spring Haven swivel chairs carry a 27-inch deck while Santa Rosa stops at 23 — a 4-inch difference in thigh support that no amount of tucking fixes. Measure depth from the front rail to the seat back, not the frame exterior.
Two series use swivel bases (Edington, Spring Haven) and one is trapezoid (Pacific Grove — 25 inches at the front edge, 22 at the back). A trapezoid cushion cut as a rectangle bunches at the back within a season. West Park’s “lounge chair” listing is a cover only, at 31 × 24.25 — a different animal from a full cushion.
The safe path is the same for all 18: pull the old cushion, measure width × depth × thickness edge to edge, and match against the chart. Your tape beats the label every time — frame generations within a series occasionally drift by half an inch.
Hampton Bay lounge chair sizes — all 18 series, one chart
Seat figures for every charted Hampton Bay lounge chair — width × depth × thickness, all inches, straight from the series pages. The series name links to its full line chart.
Your lounge chair not on the chart — an unlisted or newer series? Send the photo and your tape measurements; we identify the line and cut to your numbers either way.
Measure before you order
Three numbers replace the whole chart when they’re accurate: seat width, seat depth, cushion thickness — each taken edge to edge on the old pad, seams included. Back cushions need width and height. Full walkthroughs live here, or upload a photo with your quote request and your figures get checked before the first cut.
Fabric options & estimated pricing
Same exact-fit dimensions, every fabric one price. Cotton linen is the durable default, solution-dyed acrylic for full-sun exposures, velvet for covered rooms. All 119 open in the configurator at one flat rate — no fabric surcharges.
Pricing shown is per complete lounge chair — seat and back, made to order. Quotes for other series follow their own charted dimensions; nothing is cut before the final quote is confirmed.
Rebuild in any fabric
Rebuild in any fabric — every lounge chair chart on this site cuts in any of the 119 fabrics.
Frequently asked questions
How do I know which Hampton Bay series my lounge chair is from?
Check the white label under the seat frame or along the frame rail first — it carries the series name. No label, match your seat width, depth and thickness against the 18-series chart above; the combination is usually unique. Photos work too: upload them with your quote request and we’ll confirm the line.
Why do lounge chair thicknesses vary from 3.5 to 6 inches?
Hampton Bay positioned different series at different price and comfort points — the Riley runs a slim 3.5-inch seat while Beverly and Pembrey carry 6-inch plush builds. Substituting a thinner pad lowers seat height and changes the look; substituting a thicker one can push your knees awkwardly high. Match the OEM thickness.
Can I order just one lounge chair cushion?
Yes. Any piece, any fabric, no minimums — a single seat, a single back, or the pair. If you’re replacing one piece of an adjacent pair, ordering both together keeps the dye lot consistent.
How much do Hampton Bay lounge chair cushions cost?
Complete lounge chair sets (seat + back) span roughly $282 to $332 across the charted series at every fabric one price, depending on series dimensions and foam density (35D to 65D). The three reference rows above show the spread. Nothing is cut before the final quote is confirmed.
How long do custom lounge chair cushions take?
Every set is cut and sewn after you order — 4-7 business days to craft, a 4-7 business-day make-and-ship window to your door. Rush service (3-5 business days) covers most of the fabric list.
Will cushions from a different Hampton Bay series fit my chair?
Widths overlap between series — 22 to 25.25 inches — but depth and thickness rarely do. A near-miss slides or rides up within weeks. Cut to your own tape numbers and the question disappears.
What you get ordering from us
- Factory-direct. Orders land at the outdoor cushion factory itself — the cutting, filling, and sewing on your set is all done here. Nothing is brokered or dropshipped.
- Foam density 35–65D. Every seat is filled firm — high-resilience cores that hold the edge, softer than the flattened pads they replace and cut for outdoor seasons.
- Order-made, no minimums. Any piece, any fabric — a single cushion or a whole set.
- ± ½ inch, guaranteed in writing. We verify your figures against the chart before the cut — pieces outside tolerance get remade at no cost.
Hampton Bay lounge chair cushions from $282 — four steps to a quote.
Build My Lounge Chair Cushions
Not sure about a size? Upload a photo and we’ll confirm the series and figures before cutting.