Edington Replacement Cushions for Hampton Bay (2026 Exact-Fit Guide)

Exact OEM measurements for every Hampton Bay Edington piece — measured from OEM & supplier listings.

Hampton Bay Edington replacement cushions — glider bench and swivel lounge chair, cut to OEM series dimensions

Start with your shape

Not sure? Pick the closest — every measurement is confirmed before we cut.

Don't see your shape? We make any shape.

Straight edges? A top photo + the edge numbers is all we need. Curved? Trace it on paper next to a tape measure and email us a photo.

Enter your measurements

Measure the old cushion flat, edge to edge — never the frame.

Units in — decimals (23.5) or fractions (23 1/2)
Your cushion drawing appears here as you type.

Choose your fabric

Five families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.

Use:
Pattern:

All covers cut to your exact dimensions — no stock sizes, zippered covers that remove for washing.

Review & order

Calculated live from your measurements — every line, no surprises.

Price breakdown

Free shipping over $158 · $29 flat below

Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote

Your cushion
Your configuration
Photo (optional)

Odd shape or tricky frame? Upload a photo of your furniture or old cushion — one overall shot, plus a top and side view of the old cushion if you can.

JPG, PNG or WebP · up to 10 MB each · max 3

Factory Direct

We make what we sell — nothing brokered

119 Fabrics

Scroll all 119 in the configurator first

±½″ Tolerance

Your dimensions, cut as entered

Remake Free

Outside the tolerance, it is remade on us

The Edington line at a glance

Edington is a Hampton Bay line built around two unusual pieces: a two-seat 48-inch glider bench and an extra-roomy swivel lounge chair, rounded out by a matching ottoman. All three are wonderful furniture — and all three are nearly impossible to re-cushion at retail, because a one-piece 48" bench pad and a 25.25"-wide swivel seat match no standard size on the shelf. When the originals flatten, the usual answer is a whole new set.

We cut Edington cushions to the original factory dimensions below — the full-width glider bench pad, the ottoman, and the swivel chair’s roomy seat and back — in cotton linen, tech fabric, or premium velvet. Made to order by the factory that ships them.

Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — the one-piece 48"-wide glider bench pad and the 25.25" swivel seat are Edington signatures. Our full measuring guide has the walkthrough.

A glider, a swivel — and one more curve

Edington is a porch line with movement at its heart. The glider bench travels on its own mechanism, and its one-piece 48 x 21.5-inch pad rides along — no ties needed, because the pad’s own weight holds it to the seat deck while the frame does the moving. The swivel lounge chair turns in place under its generous 25.25 x 26.5-inch seat, the back following around with it. Between them sits the ottoman (22 x 20 inches), the one conventionally sized citizen of the trio.

There is a fourth Edington piece that never made the chart: a curved loveseat, which the supplier catalog lists only as ‘as per factory template’ — no published dimensions at all. If your set includes it, the path is a paper template rather than numbers: trace the seat deck’s front arc and back arc on taped-together newspaper, mark the width at both ends and the depth at the deepest point, and send photos of the piece. Curved frames are exactly what shape-based custom cutting is for.

On fabric for a moving set: every slide and swing is a small abrasion event, so the flat-woven canvases outlast deep piles on these frames — the same logic as high-traffic indoor seating. And since the ottoman is the piece that migrates between glider and swivel duty, ordering its cover in a coordinating tone from your main fabric’s color family keeps the trio looking intentional no matter where the ottoman ends up that afternoon.

Two practical closing notes for the big pieces: the 48-inch bench pad stores flat under a bed or on a closet shelf and carries comfortably with a person on each end; and if your glider’s original pad was thicker than five inches, keep to the published loft when replacing — an over-tall pad can brush the arm internals at the extremes of the glide, which shows up as a faint rub line long before anything wears out.

Edington the full size chart

>Piece>Part>Qty>Width × Depth × Thickness (in.)
>Glider Bench>Seat>1>48 × 21.5 × 5 (one full-width pad for both seats)
>Ottoman>Ottoman>1>22 × 20 × 5
>Swivel Lounge Chair>Seat>1>25.25 × 26.5 × 5
>Swivel Lounge Chair>Back>1>24.5 × 22.5 × 5

Dimensions for the complete Edington line: width, depth, and thickness in inches.

Qty, in practice: "Qty" is the number of separate cushions, not one joined pad. Every Edington piece takes a single cushion of the listed size — the glider bench pad really is one 48-inch piece, not two 24" pads pushed together.

Piece not listed? Photograph it, add your measurements — we build custom cushions for every Hampton Bay frame. Not sure it’s Edington? See how to measure a bench cushion and match the numbers.

Measure before you order

Before you order, see our measuring guide — for the Edington glider bench, measure the full seat deck edge to edge (48"), not just one sitting position, and check the depth at the hinge side where the glider mechanism sits.

Closest Hampton Bay neighbors in the measured database: Spring Haven (the Spring Haven four-piece run) and Fenton (the Fenton trio) — each with its own dimension chart. Every series we have measured sits in the Hampton Bay replacement cushions database.

Fabric options & estimated pricing

Same exact-fit dimensions, every fabric one price. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.

Fabric-by-fabric? The full fabric list in the customizer — any fabric, same dimensions.

ARY014.jpg
>Piece (complete set)35D foam50D foam65D foam
>Ottoman>$136>$139>$148
>Glider Bench (one-piece 48" pad)>$259>$266>$287
>Swivel Lounge Chair (seat + back)>$343>$351>$376

Per-piece estimates, all cushions in the piece accounted for, made to order. Final quote lands at checkout. The closure on every cover is a zipper (covers remove for washing).

Rebuild fabrics

Rebuild fabrics — every series chart cuts in any of the 119 fabrics.

Frequently asked questions

Yes — a single 48"-wide pad covering the full two-seat bench, 5" thick.

25.25" wide × 26.5" deep, a few inches roomier than typical lounge chairs, so generic cushions won’t fit.

The published line covers the glider bench, ottoman and swivel lounge chair. For other Edington pieces, order by measurement — we cut custom.

Budget 136 at the low end and 148 at the top for the ottoman (complete, all cushions) across 35D to 65D foam densities — every fabric, one price. Your confirmed quote precedes any cutting.

Each order is cut and sewn after you order — you’ll get a confirmation with every dimension before we sew. Rush production is available if you need them faster.

Your choice of three families: cotton linen (a durable everyday weave), tech fabric (water-resistant and easy to clean), or premium velvet (a high-end feel that stands up to cat claws) — all cut to the exact Edington dimensions.

The case for ordering direct

Edington replacement cushions from $136 — the quote takes four steps.

Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Another line entirely? Locate your shape and order custom.

Related pages

More from the blog