15" x 15" Seat Cushions – Custom Made to Your Exact Size

Every dimension — width, depth, thickness — is cut to what you measure, not to a size chart. No middleman, no minimum.

See the full cushion size chart — every standard size and its typical frames at a glance.

15 x 15 seat cushions — square replacement pads for kitchen and dining chairs

Start with your shape

Not sure? Pick the closest — every measurement is confirmed before we cut.

Don't see your shape? We make any shape.

Straight edges? A top photo + the edge numbers is all we need. Curved? Trace it on paper next to a tape measure and email us a photo.

Enter your measurements

Measure the old cushion flat, edge to edge — never the frame.

Units in — decimals (23.5) or fractions (23 1/2)
Your cushion drawing appears here as you type.

Choose your fabric

Five families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.

Use:
Pattern:

All covers cut to your exact dimensions — no stock sizes, zippered covers that remove for washing.

Review & order

Calculated live from your measurements — every line, no surprises.

Price breakdown

Free shipping over $158 · $29 flat below

Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote

Your cushion
Your configuration
Photo (optional)

Odd shape or tricky frame? Upload a photo of your furniture or old cushion — one overall shot, plus a top and side view of the old cushion if you can.

JPG, PNG or WebP · up to 10 MB each · max 3

Factory Direct

The workshop that cuts it is the one that ships it

119 Fabrics

Every fabric on the list, open in the configurator

±½″ Tolerance

Measured cuts, not stock-chart guesses

Remake Free

Miss on our side and the remake is free

Build Your 15 x 15 Cushion

The 15-inch square is small-seat country: kitchen stools, folding chairs, piano benches, garden seats, and kids’ chairs. Small squares are where stock sizing is sloppiest — a “15 inch” retail pad can measure anything from 14 to 16 — and where a quarter inch of accuracy shows most. We cut to your number.

Every 15 x 15 seat cushion is cut to the measurements you send — width, depth, thickness. Two inches keeps a stool at counter height; 3″ suits a bench you linger on. Fabric families start with Cotton Linen, a durable everyday weave with no pilling, shrinking, or fading; Tech Fabric, the waterproof, wipe-clean leather-like workhorse; and Premium Velvet, plush claw-resistant velvet for indoor luxury — the same tiers as our full-size lines, because sun through a kitchen window fades fabric too. Covers close with a zipper — they unzip to remove and wash, keeping small pads fresh.

Pricing — estimated starting at

Foam densityEstimated price*
35D foam$86
50D foam$88
65D foam$90

*One cushion, 15 × 15 in. (1.56 sq ft top surface): $45 make-base + 1.56 sq ft × combined foam + fabric rate ($26.47/sq ft in 35D, $27.37 in 50D, $28.69 in 65D, each at the 3-inch default). Every fabric in the 119 lineup carries the same price — choose on looks, not budget. The from-83 entry pairs 35D foam with the thinnest 2-inch cut. Thickness is settled at checkout, and each dimension is confirmed with you before any cutting.

For comparison: U.S. custom-configurator specialists’ 2026 listings for made-to-order cushions in common sizes (16×16 through 24×24) run roughly $71–$119 before shipping — and most only reveal that price after a quote request. The pricing math is right on the page — every dollar of the estimate traces back to a dimension you can measure.

What fits a 15 x 15 cushion?

No factory-original cushion in our measurement library lands within ¾″ of this size yet — which makes a 15 x 15 a true custom order, and custom orders are our whole business. Measure your old cushion flat (edge to edge, seam to seam), or measure the seat deck between the frame rails, and send us the numbers. We cut to whatever you measured — the quarter inch included — in any fabric, any thickness, one piece or a full set.

The measurement library holds no factory-original at this exact square — brand-name patio lines rarely cut seats below 16 inches, which tells you something useful: a 15 x 15 deck is usually a stool, a vintage chair, or an imported set whose cushions were never catalogued anywhere. The closest documented squares in our charts sit at 16 x 16 and up (see the 16 x 16 page and the replacement library), and any of them can be ordered a fraction smaller — the cutting table does not know the difference between a stock number and your number. The square ladder climbs on from there — the 23 x 23 lounge square mid-range, the 30 x 30 daybed square at the top — every rung on the same formula.

Mismatch with the chart? The chart loses — your measurements win.

Measuring tips for a 15 x 15

Cabana Stripe Canvas - Gray
  • With the old cushion on a flat surface, take width edge-to-edge, depth front-to-back, and thickness along the seam line. Never measure a pad while it is squeezed.
  • No old cushion? Measure the seat deck between the frame rails and arms, and send the raw numbers rather than rounding.
  • Photograph the label under the frame first — a model number can match you to a documented series chart in seconds.

The complete walkthrough, photographed step by step: How to Measure (and Identify) Your Cushions.

Fabrics that suit a 15 x 15

Small squares take the same fabric families as every other size we cut. Kitchen and bar stools gravitate to Tech Fabric — waterproof and wipe-clean, which matters directly above a floor that sees spills. Cotton Linen suits covered porches and low-spill dining rooms, and Premium Velvet takes formal dressing stools and cat-adjacent seating. Because the footprint is small every fabric prices the same per pad — worth choosing on lifestyle, not budget. The full comparison is in the outdoor fabric guide.

Fabrics from the 119-option range, pictured — see all of them enlarged in the configurator before ordering.

Cabana Stripe Canvas - Blue

15 x 15 on stools, counters, and bars

Foam thickness for a 15 x 15

Fifteen-inch squares live almost entirely on stools and small chairs, where thickness is arithmetic: counter stools sit 24–27 inches high and bar stools 28–32, so every inch of cushion is an inch of knee clearance under the counter lip. Two inches where the gap is tight, 2.5–3 where the chair is for sitting rather than perching. Kids’ chairs flip the logic — a thicker pad is often the point, buying a growing child another year at the big table.

On foam, the honest spec at this size is 35D for occasional seats and 50D for the stool that hosts every morning coffee; density is what separates the pad that recovers for years from the one that dishes where you always sit. All four grades, 35D–65D, are available — confirmed with your dimensions before cutting.

Small squares live at three heights, and the height — not the footprint — is the real specification. Kitchen counter stools sit under a 36-inch counter; bar stools sit under a 40–42 inch bar; backless task and vanity stools sit wherever they were put. Each height was designed around a pad thickness, and every inch of cushion is an inch of seat height: two inches keeps a counter stool under its counter, and the same stool at four inches puts the sitter’s elbows at chin level. Measure the deck, then measure the clearance under the counter’s overhang with someone sitting — the second number sets the thickness ceiling.

Deck shape matters more here than anywhere: 15-inch decks run squares, rounds, and squares-with-rounded-corners, and swivel stools wear unevenly enough that two “identical” chairs can differ by a quarter inch. Per-stool line items in one order solve it — same fabric run, each pad to its own numbers.

A few from the 119-fabric lineup — review the full set, zoomed, in the configurator first.

Frequently asked questions

2″ for counter stools where height matters; 2.5″–3″ for chairs you sit in longer. Every inch of cushion is an inch of seat height.
Both — you choose the fabric. Cotton Linen, our durable everyday weave, for kitchen use; Tech Fabric, the waterproof, wipe-clean leather-like workhorse, for garden and patio seating.
Yes — recommended for daily-use stools. Standard foam feels fine for occasional seating and bottoms out under daily use.
Measure the deck, not the label: most bar stools run 13–16 inch round or square decks, and 15 x 15 covers many of them — but stool decks vary more than any other seat class. Measure edge to edge to the nearest quarter inch; a pad cut to your numbers beats a label every time.
Yes — per-stool numbers in one order, one fabric run, matching dye lots. If two stools differ by a quarter inch (common on swivel stools worn unevenly), give each its own line item; the price formula does not charge extra for precision.
Height, mostly — counter stools sit under 36-inch surfaces and bar stools under 40–42, so the clearance under each sets the thickness ceiling. A 15 x 15 pad at 2 inches works at both; the same pad at 3.5 clears a bar and collides with a counter. Measure the overhang with a sitter before picking thickness.

Made and shipped by the same hands

Custom 15 x 15 cushions from $83 — four steps to a quote.

A boundary we hold: seat cushions are comfort products, not medical devices. Firm high-density foam can feel supportive, but nothing on this page diagnoses, treats, or prevents any condition — for pressure, circulation, or post-surgery seating questions, the specification belongs to a clinician, and we will cut to whatever they specify.

Ready when you are. Enter your measurements, pick your fabric and your finishing — every dimension comes back to you for confirmation before we cut. One cushion or a whole set, from the factory that ships them. Cut to within ½ inch of your confirmed numbers — outside tolerance, remade free.

Related pages

From the blog archive