Palm Cove Deep-Seating Group Replacement Cushions for Martha Stewart (2026 Fit Guide)

OEM measurements for every piece of the Martha Stewart Palm Cove line — measured from supplier listings.

Martha Stewart Palm Cove replacement cushions — compact deep-seating group, cut to OEM series dimensions

Start with your shape

Not sure? Pick the closest — every measurement is confirmed before we cut.

Don't see your shape? We make any shape.

Straight edges? A top photo + the edge numbers is all we need. Curved? Trace it on paper next to a tape measure and email us a photo.

Enter your measurements

Measure the old cushion flat, edge to edge — never the frame.

Units in — decimals (23.5) or fractions (23 1/2)
Your cushion drawing appears here as you type.

Choose your fabric

Five families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.

Use:
Pattern:

All covers cut to your exact dimensions — no stock sizes, zippered covers that remove for washing.

Review & order

Calculated live from your measurements — every line, no surprises.

Price breakdown

Free shipping over $158 · $29 flat below

Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote

Your cushion
Your configuration
Photo (optional)

Odd shape or tricky frame? Upload a photo of your furniture or old cushion — one overall shot, plus a top and side view of the old cushion if you can.

JPG, PNG or WebP · up to 10 MB each · max 3

Factory Direct

No trading company between you and the cutting table

119 Fabrics

All 119 viewable in the configurator

±½″ Tolerance

Cut to the dimensions you supply

Remake Free

Wrong build or wrong fabric, remade free

The Palm Cove line at a glance

Palm Cove is a compact Martha Stewart deep-seating group sold through Home Depot: a lounge chair, a three-seat sofa, and an ottoman. The cushions share one signature build — a generous 5-inch thickness, waterfall fronts, double piping, and a clean hardware-free seating style with rounded back corners on the lounge chair. It is a comfortable spec, which is exactly why a flattened original is so noticeable.

We cut every Palm Cove piece to the original factory dimensions below: the 24-inch lounge chair pair, the sofa’s six individual pads, and the ottoman. Choose cotton linen, tech fabric, or premium velvet — sewn by the factory that ships them.

Decimal precision to the quarter inch on every field, with the estimate updating live as you type. Builds that ship from here weekly: single seats and backs, complete matched sets, split seat blocks on multi-seat frames, trim-clearing notched corners, and thickness tiers spanning 2 to 8 inches — one per-square-foot formula, so no shape adds a fee.

Not this series, or a piece that isn’t charted? Start from any shape → — the cut goes by your tape.

No ties, no hardware: a line that stays put by fit alone

Palm Cove’s published build notes repeat the same three phrases on every piece: waterfall front, double welt, no ties. Nothing to knot, snap, or loop — each pad registers on its frame by exact footprint and its own 5-inch mass. That makes the thickness spec more than a comfort number here. A replacement cut thinner than the original drops the seating height, and a loose pad on a hardware-free frame migrates every time someone stands up.
Close-up of flat knife-edge seam detail on a tailored cushion
The sofa is a six-pad array — three seats at 22.5 × 25.5, three backs at 22.5 × 18 — with a single optional button on each back. Six pads cut in one batch keep dye lots and seam alignment consistent, which matters on a light solid where even slight variation shows; replacing one worn pad years later is where color matching earns its keep. The lounge chair breaks pattern within this small line, carrying rounded back corners on its 24 × 24 seat that no other Palm Cove pad shares.
The ottoman closes the set at 24 × 19 with a side zipper — the one visible closure in the line, and a practical one, since it lets the cover come off for cleaning without disturbing the fill. Our Palm Cove work covers complete cushion units, core and cover built together to the chart numbers; cover-only conversions are outside what we ship for this line.
Small lines concentrate wear. Palm Cove is three pieces and one thickness — every pad in the chart, seats, backs, and ottoman alike, runs the full 5 inches, with no thin dining tier and no slim footrest in the mix. That uniformity cuts two ways. A single replacement pad drops into the set with no silhouette mismatch, and a full three-piece rebuild keeps the line’s proportions intact without mixing thicknesses. Decide by surface, not by piece: the sofa’s six pads take the daily load and usually age first, while the lounge pair and ottoman often outlast them by seasons.

Pricing — estimated starting at

Piece (complete set)35D foam50D foam65D foam
Ottoman$139$143$152
Lounge Chair (seat + back)$293$300$321
Sofa (3 seats + 3 backs)$879$900$960

Estimated pricing — per complete piece, all cushions included, made to order ($45 make-base plus per-sq-ft foam and fabric rates). Final quote confirmed before we cut. Every cover closes with a zipper and removes for washing.

As a yardstick: U.S. specialists running custom configurators priced made-to-order cushions for common sizes (16×16 through 24×24) around $71–$119 before shipping in 2026 — numbers most buyers only see after asking for a quote. We print the formula above so you can audit the arithmetic first.

Palm Cove sizes and dimensions, in full

PiecePartQtyWidth × Depth × Thickness (in.)
Lounge ChairSeat124 × 24 × 5 (waterfall front, double piping, round back corners)
Lounge ChairBack124 × 17 × 5 (optional single button, double piping, waterfall top)
SofaSeat322.5 × 25.5 × 5 (three separate cushions, each 22.5" wide)
SofaBack322.5 × 18 × 5 (optional single button per back, waterfall top)
OttomanOttoman124 × 19 × 5 (waterfall front and back, double piping)

Size data for each Palm Cove piece: width, depth, and thickness, in inches.

Browsing by size instead of series? The lounge chair seat matches our 24 × 24 outdoor cushions page. Anything not listed here — send your measurements and we cut to them.

Measure before you order

Measuring a patio chair seat deck edge to edge for a custom patio cushion — width and depth to the nearest quarter inch

Before anything else, spend three minutes with our measuring guide — especially on the sofa: confirm each seat block reads 22.5" wide, because adjacent Martha Stewart series run 22"–24" and half-inch errors add up across a three-seat run.

Closest Martha Stewart neighbors in the measured database: Miramar (the Miramar pair) and Victoria Amelia (the Victoria Amelia set) — each with its own dimension chart.

Size charts for all seven lines live on the Martha Stewart index page.

Fabric options

Same exact-fit dimensions, every fabric one price. Cotton linen is the breathable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.

solid in Premium Olefin solid Beige — cushion fabric option

Is your set really Palm Cove?

Check three things: (1) the white label under the seat frame or inside an arm — model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original assembly manual, which lists the collection name; (3) a tape measure — Palm Cove’s 5-inch-thick waterfall-front pads are the signature. Our full measuring guide walks you through it.

Fabrics from the 119-option range, pictured — see all of them enlarged in the configurator before ordering.

Frequently asked questions

Six separate pieces: three seat cushions at 22.5" × 25.5" × 5" and three back cushions at 22.5" wide × 18" high × 5" thick. They are individual pads, not one joined mattress, so you can flip and rotate each one.

The OEM design has no fasteners — waterfall fronts and double piping keep the pads seated on the frames. We make the pads on the same logic: an exact-fit cut that sits the frame without wandering.

Estimated pricing from $139 for the ottoman to $960 for the complete three-seat sofa (all six cushions) — every fabric, one price across 35D to 65D foam densities. Final quote confirmed before we cut.

Every set is cut and sewn after you order — a 4-7 business-day make-and-ship window, crafted in 4–7 business days then flat-rate shipped to your door. Most fabrics qualify for the 3–5 business-day rush option.

Cutting and sewing start once the order is in — plan on a 4-7 business-day make-and-ship window: production typically runs 4–7 business days, with a 3–5 business-day rush option on most fabrics.

Every cover here unzips — cleaning can be a cloth in hand or a full wash cycle. On ease, Tech Fabric wins: a waterproof surface wiped down damp. Cotton Linen answers to spot cleaning and a low-heat iron from the back. Velvet suits dry cleaning or a careful hand wash, with the pile brushed flat to dry; Chenille is strictly spot-clean, tufts left alone. All 119 options sit in the configurator, zoomable before you order.

One workshop, start to finish

Custom Palm Cove replacement cushions from $139 — a four-step quote.

Related pages

Reading list