Hampton Bay Loveseat Cushions
Factory Direct — The workshop that cuts it is the one that ships it
119 Fabrics — Every fabric on the list, open in the configurator
12 Series Charted — One-piece and two-seat builds, both listed
Free Remake — Miss on our side and the remake is free
Hampton Bay Loveseat Replacement Cushions — 12 series, one chart (2026)
Every Hampton Bay series that ships a loveseat, on one page — 12 series, split into one-piece pads and two-seat sets, all measured to OEM figures.
One pad or two — the loveseat’s defining question
Hampton Bay loveseats come in two builds, and they are not interchangeable. Four series (Kampar, Melbourne, Middletown, Pacific Grove) use a single one-piece pad 45 to 49 inches wide spanning both seats. The other eight ship two separate cushions, each 22.5 to 28 inches wide. Which one you have dictates what you order — the chart below lists both, series by series.
Identify yours in three steps: (1) count the cushions — one slab or two blocks; (2) read the white label under the seat frame for the series name; (3) measure the full inside width between the arms and compare with the chart.
Where loveseat replacements go wrong
The classic misorder: a one-piece pad bought for a two-cushion frame. It bridges the center seam support and flexes in the middle within weeks. If your original was two cushions, order two cushions — the frame was built for that seam.
Going the other way is sometimes deliberate: two worn-out blocks replaced by one solid slab. It can work on a flat deck, but only if the full inside width between the arms is measured and the center of the deck is flat — a raised center rail makes a one-piece pad rock. Measure the deck, not the old cushions.
Watch the two odd shapes in the chart. Pacific Grove’s one-piece pad is a trapezoid — 49 inches along the front edge, 46 at the back — and cutting it as a rectangle leaves visible overhang. Melbourne ran both a 49-inch and a 51-inch loveseat; the label alone won’t tell you which, the tape will.
Thickness runs 4 to 6 inches across the twelve series, and Verrado sits at the plush end with a 6-inch build. As with every Hampton Bay piece: width from the old pad edge to edge, depth front rail to seat back, thickness seam to seam.
Hampton Bay loveseat sizes — 12 series, one-piece and two-seat
OEM loveseat figures for every charted series, grouped: one-piece pads first, then two-cushion sets (per-cushion width shown). The series name links to its full line chart.
Your loveseat not charted — newer or unlisted series? Send the photo and your tape measurements; we cut to your numbers regardless of the label.
Measure before you order
For a one-piece pad: full inside width between the arms, depth front rail to seat back, thickness at the seam. For two-seat builds: each cushion measured separately, plus the gap between them. Guided walkthroughs live here — or upload a photo with your quote request and your figures get checked before cutting.
Fabric options & estimated pricing
Same exact-fit dimensions, every fabric one price. Cotton linen for durability, solution-dyed acrylic for full-sun decks, velvet for covered rooms — 119 fabrics, one flat rate, no surcharges.
Pricing shown is per complete loveseat — every cushion the piece uses, made to order. Quotes for other series follow their charted dimensions; nothing is cut before the final quote is confirmed.
Rebuild in any fabric
Rebuild in any fabric — every loveseat chart on this site cuts in any of the 119 fabrics.
Frequently asked questions
One-piece or two-seat cushions — which do I need?
Whichever your frame shipped with. One-piece pads (Kampar, Melbourne, Middletown, Pacific Grove) span both seats on a flat deck; two-cushion builds sit on a frame with a center seam support. Replacing two blocks with one slab only works on a verified flat deck — measure it before deciding.
Can I switch from two cushions to one solid pad?
Sometimes — if the deck is flat between the arms with no raised center rail, a one-piece pad can replace two blocks. Measure the full inside width and check the deck surface. We cut either configuration to your numbers.
Why does my Melbourne loveseat measure 51 inches, not 49?
Melbourne ran two loveseat widths — 49 and 51 inches. The label doesn’t distinguish them; the tape does. Both are charted on the Melbourne series page, and both are cut on request.
How much do Hampton Bay loveseat cushions cost?
Complete loveseat sets span roughly $580 to $720 across the charted series at every fabric one price, depending on series dimensions and foam density. The reference rows above show the spread. Nothing is cut before the final quote is confirmed.
How long do custom loveseat cushions take?
Every set is cut and sewn after you order — 4-7 business days to craft, a 4-7 business-day make-and-ship window to your door. Rush service (3-5 business days) covers most of the fabric list.
Can photos replace measurements?
A photo helps identify the series, but the cut follows your tape numbers. Upload both — photo plus width × depth × thickness — and your figures get checked against the chart before the first cut.
What you get ordering from us
- Factory-direct. Orders land at the outdoor cushion factory itself — the cutting, filling, and sewing on your set is all done here. Nothing is brokered or dropshipped.
- Foam density 35–65D. Every seat is filled firm — high-resilience cores that hold the edge, softer than the flattened pads they replace and cut for outdoor seasons.
- Order-made, no minimums. Any piece, any fabric — a single cushion or a whole set.
- ± ½ inch, guaranteed in writing. We verify your figures against the chart before the cut — pieces outside tolerance get remade at no cost.
Hampton Bay loveseat cushions from $580 — four steps to a quote.
Not sure whether yours is one pad or two? Upload a photo and we’ll tell you before quoting.