Beachside Replacement Cushions for Hampton Bay (2026 Custom-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Collected reference measurements for every piece of the Hampton Bay Beachside line — measured from OEM & supplier listings.
The Beachside line at a glance
Beachside is Hampton Bay’s rope-look wicker sectional from Home Depot — a modular seating set with CushionGuard toffee-trellis tan cushions. Published figures for the line are thin: Home Depot’s own Q&A confirms the loveseat section’s seat cushion at 24.41 inches square with roughly 5 inches of loft, and that is the hard number we have; the armchair, corner and ottoman modules were never published anywhere.
So we built this page the honest way. Order the loveseat-section pads from the chart below, and for every other module, measure and order custom — same fabrics, same factory, and sectionals are exactly what our shape-based custom flow was built for. Treat all figures as approximate and confirm against your own cushions before ordering.
Beachside cushion sizes — full chart
Custom-fit measurements for the full Beachside line. Width × depth × thickness, in inches. HD Q&A + owner-measured, treat as approximate
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Sectional (loveseat section) | Seat | 1 | 24.41 × 24.41 × 5 |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Beachside? See how to measure your cushions and match the numbers.
Is your set really Beachside?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — a 24.41" square seat pad on ~5" loft on a rope-look wicker frame — and no other published numbers anywhere. Our full measuring guide walks you through it.
Fabric options
Same custom-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — on a sectional with sparse published data, measure every module separately: manufacturers varied module widths across runs, and each pad must match its own deck.
Get your Beachside cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
What size is the Beachside loveseat cushion?
The seat pad is 24.41" wide × 24.41" deep with about 5" of loft (owner reports run 5"–5.5"). Those metric-ish decimals are the signature of this line — round numbers usually mean a different series.
What about the armchair, corner and ottoman cushions?
No trustworthy figures are published for those modules. Measure yours (width × depth × thickness, or trace odd shapes) and order custom — we cut every Beachside module to your numbers.
My cushions say CushionGuard — what does that mean?
CushionGuard is Home Depot’s treatment brand on the original covers, not a cushion size system. It tells you the set is a modern Home Depot Hampton Bay sectional; it doesn’t change what you order here.
How much do Beachside replacement cushions cost?
Pricing comes from our instant quote tool — enter your piece count and dimensions for a factory-direct estimate in seconds.
How long do Beachside cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Beachside chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Beachside order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related Hampton Bay series
- Mill Valley — sectional with a 27"/72" trapezoid wedge
- Beverly — sectional modules at 22.5" × 25.75"
- Riley — 5-seat sectional on slim 3.5" pads
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
