Custom Wicker Cushions

Build Your Wicker Chair Cushion

Wicker furniture outsells its cushion supply: the frames last decades, the weave flexes, and the decks underneath are anything but standard — trapezoids wider at the front, curves that follow the weave, depths from 19-inch dining squares to 27-inch deep-seating lounges. Universal cushions are cut for none of that geometry.

We cut wicker cushions to your deck’s numbers — dining squares, deep-seating seats and lofted backs, hinged chaises, ottomans — in foam-core builds that hold their shape against the weave. Named Hampton Bay and Martha Stewart wicker series pull straight from our measured charts.

Open the Customizer — Rectangle Preselected →

Enter seat width and depth (front and back widths if the deck tapers), thickness, and back height — then pick your fabric tier.

Need a different shape? Start from all 11 shapes →

Pricing — estimated starting at

*One wicker lounge seat (23 × 25 × 5 in.): $45 make-base + 4.0 sq ft × rate ($30.79 per sq ft, 5" 50D foam + fabric). Dining squares cost less; loveseat and sofa sets price per block.

For comparison: U.S. custom-configurator specialists’ 2026 listings run made-to-order cushions well above formula price once configured — and most only reveal that number after a quote request. The pricing math is right on the page — every dollar of the estimate traces back to a dimension you can measure.

Popular Wicker Chair Sizes We Cut

Typical wicker cushion sizes — dining squares are stock-friendly, conversation seating is not (typical, always measure).

Yours differs? That’s the point — we cut to your numbers.

How to Measure a Wicker Chair Cushion

• Measure the seat seam-to-seam across the weave, at the front and again at the back — wicker decks are wider at the front more often than any other frame type.
• Front and back widths more than half an inch apart means a trapezoid cut; say so on the order, because a rectangle will bunch.
• Curved-front frames: record the bow of the front edge — the full method is in our curved wicker measuring guide.
• Backs on woven frames: measure height and width against the back frame, same as the seat.

Full walkthrough with photos: our measuring guide.

Fill and Fabric Against the Weave

The ventilated weave changes the fill decision: it pushes moisture and debris upward through loose fills, so foam-core builds shed water, dry fast, and hold their shape where fiber-only pads compact into the weave pattern. Natural rattan and synthetic resin wicker take the same cushions — the deck geometry is what matters, not the material of the weave. For fabric, tech fabric wipes clean after pollen season, premium velvet handles claws, cotton linen breathes — the tier comparison is in the fabric guide.

The Wicker Family, Word by Word

• Outdoor wicker cushions are what most searches mean: resin wicker conversation sets on a covered porch or open patio, taking deep-seating geometry with full weather duty. The build logic is the deep-seat page’s — 5–6 inch seats, lofted wedge backs — with weatherproof fabric and vented foam cores against the weave.
• Rattan cushions follow the same decks in natural fiber frames — indoor sunrooms and covered lanais mostly — and take the same measurements; the material of the weave never changes the cut, only the fabric tier the placement earns.
• Replacement wicker cushions are the normal case, not the exception: wicker frames outlast their cushions by a decade, and discontinued big-box sets are our daily work. Measure the deck under the old pads, match the taper, and the rebuild fits the frame the originals fit. Replacement cushions for wicker chairs, sofas and loveseats all start the same way — deck numbers, front and back widths, taper flagged — and price block by block, so a three-seat rebuild quotes as three honest pieces, not one mystery number.
• Wicker chaise cushions are the family’s tapered branch — a wide straight front edge, a narrower curved back, the profile woven lounges are famous for. For full chaise lounges in woven wicker, see our custom wicker chaise cushions page.
• Cushions for wicker patio furniture run the full family — wicker sofa cushions and wicker couch cushions cut per seat block, wicker loveseat cushions as two matched pads, wicker arm chair cushions for the reading corner, down to thin wicker chair pads for narrow dining seats. Outdoor wicker chairs with cushions already faded arrive here by the thousand each spring: same frames, fresh numbers, one dye lot across the rebuild.

See all fabrics — pick by look, not budget — in the customizer.

Frequently asked questions

Can I order standard wicker cushion sizes?

Yes — standard sizes too, in 3 clicks: dining wicker runs 19–21 inch squares — 20 × 20 and 21 × 21 are stock sizes — and typing the numbers into the customizer gets the same instant factory-direct quote. Lounging decks past 22 inches are where measuring earns its keep.

What size cushions fit wicker furniture?

Dining wicker chairs take ~19–21 inch squares; conversation seating runs much larger — seats 22–28 wide by 23–27 deep with 4–7 inch back loft. Measure your seat seam-to-seam; deep-seating wicker is rarely served by universal sizes.

Can I use universal cushions on my wicker set?

On dining chairs, usually yes. On conversation sets — lounge chairs, loveseats, sofas, chaises — universal cushions are typically too shallow (wicker decks run 23–27 inches vs universal ~22) and their back pads lack the loft wicker backs need.

My wicker seat is wider at the front than the back. Does that matter?

Yes — that is a trapezoid seat, and a rectangular cushion will bunch. Measure front and back widths separately and order a trapezoid cut; it is a standard custom option.

What’s the best fill for wicker seat cushions?

Foam-core or high-resilience foam. The ventilated weave pushes moisture and debris upward through loose fills; foam sheds water, dries fast, and holds its shape against the weave pattern.

How long does a custom cushion take?

Made to order in 4–7 business days — rush production is 3–5 business days for a surcharge — made and shipped in 4-7 business days, door to door. Typical US custom shops quote 3–6 weeks for the same build; we publish the number instead of burying it in a quote.

Can you match replacement cushions for a discontinued wicker set?

That is most of our work — replacement cushions for wicker furniture nobody stocks parts for anymore. Measure the deck under the old pads (front and back widths separately on tapered seats) and we rebuild to the frame, not to a catalog. Named lines pull straight from the Hampton Bay charts and the wider pre-measured library.

Do you make wicker chair pads for dining chairs?

Yes — wicker chair seat cushions and thinner wicker chair pads for narrow dining seats are cut to your numbers, with matching back cushions if the frame takes them. Standard-friendly squares (19–21 inches) quote instantly in the customizer.

Is a Custom Wicker Cushion Right for You?

• Trapezoid decks need two widths. Woven seats run wider at the front than the back more often than not; a rectangular pad bunches exactly where you sit. Measure front and back separately and order the trapezoid cut — it is a standard shape, not a special request.
• Covers unzip — removable and washable. Zippered: the cover comes off the foam, so cleaning is a damp cloth and mild soap between machine cycles. Wipe for the daily, wash for the deep clean.
• Unsure about color? Email the factory before you order. Screens shift color, and afternoon sun shifts it again — send a photo of where the piece will live and we will say honestly how each fabric reads in that spot. The two-minute email is cheaper than a wrong-color guess.
• Custom-cut means non-returnable. A cushion cut to your numbers fits exactly one frame on earth — tolerances are published in writing (±½″, ±¾″ over 36″) and anything outside them against your confirmed numbers is remade free, whenever the error is found.

Related guide

Deciding between new cushions and a whole new woven set? Replacement Cushions for Wicker & Rattan Furniture runs the real cost math, a 30-second frame check, and how to measure the tapered seats and rounded corners universal cushions never fit.

Made by the factory that ships them

• Outdoor cushion factory for 10+ years — we cut, fill, and sew every order ourselves.
• Every dimension you send is re-checked before a single yard of fabric is cut.
• Made-to-order means any fabric, any piece, no minimum.
• If we cut it wrong — outside the ±½″ tolerance (±¾″ over 36″), wrong fabric, wrong build — remade free.

Custom wicker chair cushions from $106 — quote in 4 steps.

Custom Cushions

Every wicker build, one category

This page covers the cut-to-order build in depth. The wicker chair cushions category gathers every wicker variant we cut — seat pads, seat-and-back sets, chaise and loveseat pieces — with size tables, the transparent pricing formula and brand-series replacement charts in one place.