Riley Replacement Cushions for Hampton Bay (2026 Exact-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Exact OEM measurements for every piece of the Hampton Bay Riley line — measured from OEM & supplier listings.
The Riley line at a glance
Riley is Hampton Bay’s slim-profile sectional line from Home Depot: a five-seat modular sectional and a matching lounge chair, every cushion a uniform 3.5 inches thick. That tailored, low-slung look is the point of the line — and it’s also why a standard 5-inch replacement pad turns a Riley sectional into a overstuffed sofa that no longer fits under the coffee table.
We cut every Riley piece to the original factory dimensions below — per module or as the full nine-piece sectional set — in cotton linen, tech fabric, or premium velvet, made by the factory that ships them.
Riley cushion sizes — full chart
Exact-fit measurements for the full Riley line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Lounge Chair | Seat | 1 | 24 × 24 × 3.5 |
| Lounge Chair | Back | 1 | 24 × 17.5 × 3.5 |
| Sectional (5-seat) | Seat | 5 | 24 × 24 × 3.5 (five separate cushions, each 24" wide) |
| Sectional (5-seat) | Back | 4 | 24 × 17.5 × 3.5 (four separate cushions, each 24" wide) |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Riley? See how to measure your cushions and match the numbers.
Is your set really Riley?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — a uniform 3.5" profile on every cushion — the slimmest consistent line in the Hampton Bay range. Our full measuring guide walks you through it.
Fabric options & estimated pricing
Same exact-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
| Piece (complete set) | Cotton Linen | Tech Fabric | Premium Velvet |
|---|---|---|---|
| Lounge Chair (seat + back) | $149 | $157 | $165 |
| Sectional, per module (1 seat + 1 back) | $149 | $157 | $165 |
| Sectional, full 5-seat set | $544 | $579 | $615 |
Estimated pricing — per complete piece, all cushions included, made to order. Final quote confirmed at checkout; welt cord and ties available as add-ons. Covers close with a sewn envelope closure (no zippers on our line).
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — on a sectional, measure every module, not just one, and count seats and backs separately: configurations varied across production runs.
Get your Riley cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
How many cushions is the Riley sectional?
The published configuration is five 24" × 24" × 3.5" seats and four 24" × 17.5" × 3.5" backs — nine pieces. Count yours before ordering; module counts varied by set.
Why are Riley cushions thinner than other Hampton Bay lines?
It’s the line’s design: a uniform 3.5" profile for a low, tailored silhouette. Don’t substitute 5" pads — the seat height and the whole look change.
Can I replace just one module's cushions?
Yes. Every pad is cut to order — replace one worn module or the full set, and we dye-match every fabric across batches as closely as the mill allows.
How much do Riley replacement cushions cost?
Estimated pricing from $149 for the lounge chair to $615 for the full 5-seat sectional (complete, all cushions) — cotton linen, tech fabric, and premium velvet tiers. Final quote confirmed before we cut.
How long do Riley cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Riley chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Riley order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related Hampton Bay series
- Beverly — sectional modules at 22.5" × 25.75"
- Mill Valley — sectional with a 27"/72" trapezoid wedge
- Melbourne — another uniform slim profile, at 4"
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
