Custom Outdoor Swing Cushions

Build Your Porch Swing Cushion

A porch swing hangs in the open air on four chains, which makes its cushions the most exposed seating in the yard: sun from above, rain from the side, wind from all four directions, and two adults rocking on top. The frame is steel or hardwood and will outlast five sets of cushions; the cushion is fabric and foam and will not. That asymmetry is the whole replacement story.

We solve it the factory way: measure the seat deck — width, depth, and where the chains pass — and we cut, fill and sew a set that fits your exact swing. Seat plus back, two-piece sets that come inside in thirty seconds, in cotton linen, tech fabric, or premium velvet, made to order by the factory that ships them.

Open the Customizer — Rectangle Preselected →

Enter seat width and depth, back height, and thickness — then pick your fabric tier and see an instant estimate with a dimension drawing you can keep.

Need a different shape? Start from all 11 shapes →

Pricing — estimated starting at

*One 4-ft swing seat (48 × 18 × 3 in.): $45 make-base + 6.0 sq ft × rate ($27.37 per sq ft, 3" 50D foam + fabric, all fabrics one price). Larger 5-ft seats and mattress-sized swing-bed sets run higher. Every dimension is confirmed with you before we cut.

For comparison: U.S. custom-configurator specialists’ 2026 listings put swing-bed cushion sets at roughly $200–$650 by size — and most only reveal that price after a quote request. We publish the formula above so you can check the math before you order.

Popular Porch Swing Sizes We Cut

Typical swing deck sizes — useful as a sanity check, not as a size chart (typical, always measure).

Seat thickness runs 2.5–4 inches on swings — thicker starts to feel like climbing onto a mattress, and on a low-hung deck it puts short legs in the air. Backs run 3–5 inches in softer fills.

<p class="Yours differs? That’s the point — we cut to your numbers.“>dim-note

How to Measure a Porch Swing Cushion

• Measure the deck, not the old cushion — the slat platform is the truth. Width across the slats at the front and at the back, depth from the front edge to where the seat meets the back frame, to the nearest quarter inch.
• Find the chain clearances before sizing the back cushion: chains pass through or beside the armrests at the four corners, and a back wider than the space between the chain lines squeezes the channel or overhangs into the arc.
• Wind is the swing’s extra axis: bring the set inside in thirty seconds when storms roll through — that habit, not hardware, is what actually extends cushion life.
• Weigh thickness against foot height: if the deck already sits at 17–18 inches, stay at 2.5–3 inches so short-legged sitters still reach the porch.

Full walkthrough with photos: our measuring guide.

Fabric for Full-Exposure Swings

A swing lives in full sun and moving air — the harshest combination short of a boat deck. Tech fabric takes rain and spills with a wipe-down; premium velvet brings the high-end look and stands up to cat claws; cotton linen is the comfortable pick for covered porches. Add the swing-specific habit: a two-piece set that comes inside in thirty seconds — the habit that actually extends cushion life. See the full fabric guide for the tier-by-tier comparison.

Swings We Build For

• The 4-ft two-seat swing — the American default at ~47–53 × 18–20 seats with 18–24 inch backs; chain clearances recorded before the back cushion is sized.
• Canopy and big-box swings — frames that vary more than plain swings; the deck and the chain channels get measured, not assumed.
• The porch swing bed — mattress-scale at crib, twin or full size in 45–60D foam for lying-flat duty; frames are less standardized than mattresses, so the deck rules.

See all fabrics — pick by look, not budget — in the customizer.

Frequently asked questions

Do you sell standard swing cushion sizes, or only custom?

Yes — standard sizes too, in 3 clicks: the classic 4-ft swing seat runs about 48 × 18 × 3, so if your deck matches, type those numbers into the customizer and get the same instant factory-direct quote. Nothing is warehoused, so a standard size is never out of stock — chain clearances are the part still worth a quick measure.

What size cushion fits a 4-foot porch swing?

A seat cushion around 48–53 × 18–20 inches and a back cushion 18–24 inches high fits most 4-ft swings — but chain clearances and slat gaps vary, so measure the deck and record to the nearest quarter inch before ordering anything.

How do I keep swing cushions from blowing off?

Bring the set in when wind is forecast — a hanging platform catches wind from all four directions, and that thirty-second habit beats any hardware. Day to day, an exact-fit pad cut to your confirmed numbers stays put through normal swinging. We don’t sew on ties or gripper undersides — our factory can’t supply them reliably, so we won’t sell you the promise.

Can I use a bench cushion on a porch swing?

Dimensionally, often yes — swing seats and benches share the long-deck geometry. Functionally, check two things a bench does not need: a two-piece set that comes inside in thirty seconds, and drainage, since a swing deck traps water against the cushion underside in a way a solid bench top does not.

What foam density should a swing bed cushion use?

45–60D — mattress-duty load on a hanging platform is closer to a heavy-use commercial seat than a chair, and lighter grades dish within a season.

How long does a custom cushion take?

Made to order in 4–7 business days — rush production is 3–5 business days for a surcharge — delivered in 3–6 weeks door to door. Typical US custom shops quote 3–6 weeks for the same build; we publish the number instead of burying it in a quote.

Is a Custom Porch Swing Cushion Right for You?

• Swing sets come in when wind is forecast — no fabric changes that. A hanging platform catches wind from all four directions; an exact fit keeps the pads on the seat day to day, but the thirty-second bring-it-in habit is what keeps them for years. If carrying a set indoors is a dealbreaker, a swing is a hard place for any cushion.
• Machine washing is not on the menu. Every cover closes with a zipper around its foam, so the cleaning spec is a damp cloth and mild soap between washes — and a cover-off wash when due. A machine cycle is how a custom cushion dies years early.
• Custom-cut means non-returnable. A pad cut to your numbers fits exactly one frame on earth. Tolerances are published in writing (±½″, ±¾″ over 36″); anything outside them against your confirmed numbers is remade free, whenever the error is found.

Made by the factory that ships them

• Outdoor cushion factory for 10+ years — we cut, fill, and sew every order ourselves.
• Every dimension you send is re-checked before a single yard of fabric is cut.
• Made-to-order means any fabric, any piece, no minimum.
• If we cut it wrong — outside the ±½″ tolerance (±¾″ over 36″), wrong fabric, wrong build — remade free.

Custom porch swing cushions from $142 — quote in 4 steps.

Custom Cushions