Charlottetown Replacement Cushions for Martha Stewart (2026 Exact-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Exact OEM measurements for every piece of the Martha Stewart Charlottetown line — measured from OEM & supplier listings.
The Charlottetown line at a glance
Charlottetown is a dining-and-lounge hybrid line from Martha Stewart: dining chairs, a rocker, a patio recliner with its own footrest cushion, and a lounge chair and loveseat. It’s also a series where most pieces were designed seat-only — the wicker frame back does the work, and only the seat pad is cushioned. That trips up owners ordering replacements, because “standard” dining sets with separate back cushions don’t match.
We copy the original configuration exactly: seat-only pads where the factory made seat-only, the two-piece recliner set where it didn’t — all in cotton linen, tech fabric, or premium velvet, cut and sewn by the factory that ships them.
Charlottetown cushion sizes — full chart
Exact-fit measurements for the full Charlottetown line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Dining Chair | Seat | 1 | 18.25 × 18.25 × 3.75 |
| Lounge Chair | Seat | 1 | 23 × 26 × 4 |
| Loveseat | Seat | 2 | 23 × 26 × 4 (two separate cushions, each 23" wide) |
| Ottoman | Ottoman | 1 | 23.5 × 19.5 × 4 |
| Patio Recliner | Seat | 1 | 23 × 26 × 4 |
| Patio Recliner | Back | 1 | 22 × 19.5 × 5 |
| Recliner Ottoman | Footrest | 1 | 23.5 × 19.5 × 2 |
| Rocker Chair | Seat | 1 | 19.75 × 19.5 × 4 |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Martha Stewart frame. Not sure it’s Charlottetown? See how to measure your cushions and match the numbers.
Is your set really Charlottetown?
Check three things: (1) the white label under the seat frame or inside the arm — model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — the 18.25" square dining seat and the quarter-inch-off 19.75" rocker are the fastest tells. Our full measuring guide walks you through it.
Fabric options & estimated pricing
Same exact-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
| Piece (complete set) | Cotton Linen | Tech Fabric | Premium Velvet |
|---|---|---|---|
| Dining Chair (seat) | $77 | $79 | $82 |
| Rocker Chair (seat) | $83 | $86 | $89 |
| Recliner Ottoman (footrest) | $84 | $87 | $91 |
| Ottoman | $92 | $95 | $99 |
| Lounge Chair (seat) | $108 | $112 | $117 |
| Patio Recliner (seat + back) | $160 | $168 | $176 |
| Loveseat (2 seats) | $177 | $186 | $195 |
Estimated pricing — per complete piece, all cushions included, made to order. Final quote confirmed at checkout; welt cord and ties available as add-ons. Covers close with a sewn envelope closure (no zippers on our line).
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — especially on the rocker: the 19.75" width is a quarter inch off the generic 20", and that quarter inch is why standard rocker pads pucker.
Get your Charlottetown cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
Do Charlottetown dining chairs have back cushions?
No — the original design is a seat cushion only (18.25" square, 3.75" thick) on a wicker frame back. If your chairs have backs, they’re aftermarket; measure them and we’ll cut to match.
Will a standard rocker cushion fit the Charlottetown rocker?
Probably not. The seat is 19.75" wide × 19.5" deep — a quarter inch off the standard 20" — and generic pads pucker at the corners. We cut to the exact original.
What's the difference between the ottoman and the recliner ottoman?
The regular ottoman is a 4"-thick pad (23.5" × 19.5"); the recliner ottoman is the pop-out footrest cushion — a slim 2"-thick piece in the same footprint. They are not interchangeable.
How much do Charlottetown replacement cushions cost?
Estimated pricing from $77 for the dining chair to $195 for the loveseat (complete, all cushions) — cotton linen, tech fabric, and premium velvet tiers. Final quote confirmed before we cut.
How long do Charlottetown cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Charlottetown chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Charlottetown order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related series
- Cedar Island — dining + deep seating + recliner with footrest
- Lake Adele — 7 piece types incl. a full-size day bed
- Melbourne — slim 4" profile, two published loveseat widths
