Hampton Bay Dining Chair Cushions

Factory Direct — The workshop that cuts it is the one that ships it

119 Fabrics — Every fabric on the list, open in the configurator

Full Sets, One Dye Lot — Six chairs, one batch, colors that match

Free Remake — Miss on our side and the remake is free

Hampton Bay Dining Chair Replacement Cushions — 8 series charted (2026)

Every Hampton Bay dining series on one page — 8 series, thin 3-to-4-inch profiles by default, two deep-seat exceptions flagged, and full-set re-cuts in 119 fabrics.

The Hampton Bay dining chair, at a glance

Dining chairs are the thin end of the Hampton Bay range: six of the eight charted series run seats 3 to 4.25 inches thick — enough to sit on for a meal, thin enough to slide under the table. Palm Canyon and Verrado break the pattern with deep 25-inch decks and 5-inch builds closer to lounge seating than dining.

Open the Customizer

Identify yours: (1) check the white label under the seat for the series name; (2) match seat width × depth × thickness against the chart; (3) replacing a whole set — count the chairs and measure one, then note whether yours are separate seat pads or one-piece seat-and-back builds (Kampar and Windsor use the latter).

Thin pads, three specific traps

Trap one: assuming lounge thickness works at the table. A 5-inch pad on a 3.5-inch Oak Cliff frame lifts the sitter four fingers above the table edge. The charted dining profiles are thin by design — match them, don’t upgrade them.

Trap two: the trapezoid. Pacific Grove dining seats run 21 inches at the front edge, 19 at the back. Cut as a rectangle, the pad overhangs the back rail and curls. It’s a standard cut for us — but only when the tape numbers say trapezoid.

Trap three: mixed construction. Kampar’s dining chair uses a single one-piece cushion covering seat and back, and Windsor ships a seat-plus-back set as well. If your originals were one-piece, ordering separate seat pads changes how the chair sits — both builds are charted on their series pages, and we cut either.

Replacing a full set, order all chairs in one lot: fabrics are dyed in batches, and one batch means one consistent color across every chair. We check every chair’s figures against your measurements before the first cut — six chairs, six verifications.

Hampton Bay dining chair sizes — 8 series, one chart

Seat figures for every charted Hampton Bay dining series — width × depth × thickness, all inches. Series names link to full line charts including back dimensions.

Your dining chairs not on the chart? Send the photo and your tape measurements — unlisted series cut to your numbers the same way.

Measure before you order

Per chair: seat width, seat depth (front rail to seat back), thickness at the seam. One-piece builds: the full outline including the back section. Measure one chair twice rather than four chairs once — and measure the chair you sit in most, it wears differently. Full guides here.

Fabric options & estimated pricing

Dining rooms are where things get spilled — cotton linen and solution-dyed acrylic both clean with mild soap, and velvet belongs under cover. All 119 fabrics at one flat rate; every chair in the set cut from the same bolt lot.

Seat-only builds price lower than seat-plus-back builds, as the reference rows show. Quotes for other series follow their charted dimensions; nothing is cut before the final quote is confirmed.

Rebuild in any fabric

Rebuild in any fabric — every dining chart on this site cuts in any of the 119 fabrics.

Frequently asked questions

How thick should Hampton Bay dining chair cushions be?

Six of the eight charted series run 3 to 4.25 inches — the thin profile that lets the chair slide under the table. Palm Canyon and Verrado are the exceptions at 5 inches with deep 25-inch decks. Match your series’ charted thickness; thicker isn’t better at the table.

Do you make the one-piece seat-and-back style?

Yes. Kampar and Windsor use one-piece seat-plus-back builds, and we cut that construction to your outline. Send the shape traced or photographed flat with your measurements.

I’m replacing a full set — will the colors match chair to chair?

Order all chairs in one lot and they’re cut from the same dye batch — the closest match the mill allows. Split orders months apart can drift a shade, same as any fabric.

How much do Hampton Bay dining chair cushions cost?

It follows construction: seat-only builds start around $154 (Palm Canyon reference) and seat-plus-back sets around $286 (Verrado reference), at every fabric one price. Whole-set quotes list every chair line by line before anything is cut.

How long does a full dining set take?

Every set is cut and sewn after you order — 4-7 business days to craft, 3-6 weeks delivery to your door. Rush service (3-5 business days) covers most of the fabric list.

Will universal dining pads fit?

Rarely. The chart spans 19.5 to 22 inches in width and 19 to 25 in depth — a universal 17 × 17 pad undershoots every charted seat. Cut-to-size costs the same here as guessing somewhere else.

What you get ordering from us

• Factory-direct. Orders land at the outdoor cushion factory itself — the cutting, filling, and sewing on your set is all done here. Nothing is brokered or dropshipped.
• Foam density 35–65D. Every seat is filled firm — high-resilience cores that hold the edge, softer than the flattened pads they replace and cut for outdoor seasons.
• Order-made, no minimums. Any piece, any fabric — a single cushion or a whole set.
• ± ½ inch, guaranteed in writing. We verify your figures against the chart before the cut — pieces outside tolerance get remade at no cost.

Hampton Bay dining chair cushions from $154 — four steps to a quote.

Build My Dining Cushions

Replacing a whole set? Send one chair’s measurements and the count — we quote the full lot in one pass.