Hampton Bay Swivel Cushions
Every Hampton Bay series that ships a swivel chair, measured to OEM figures on one page — two series, seat and back sizes, and custom re-cuts in any of 119 fabrics.
The Hampton Bay swivel chair, at a glance
The swivel lounge chair is the rarest piece type in the Hampton Bay range — two of the 24 measured series ship one, and they sit at opposite ends of the size map. Edington’s swivel runs a roomy 25.25 × 26.5 seat under a 24.5 × 22.5 back; Spring Haven’s runs 23.5 × 27 — the deepest deck in the brand — under a signature 7-inch-thick back, the thickest back cushion in our whole measured library. Neither shares a dimension with the other.
Find your series in three steps: (1) read the white label under the seat frame — swivel bases hide it well, so check the frame rail too; (2) match your tape numbers against the chart below — the 7-inch back settles it fast; (3) still stuck — send a photo and we’ll identify it with you before anything is cut.
What a swivel base changes about the cushion
A swivel chair turns in place under its seat pad — every rotation drags the pad across the frame’s swivel plate a few degrees at a time, so pads that rely on gravity alone walk and wrinkle. A replacement cut to the exact OEM footprint should keep the original tie positions; if you are re-covering rather than replacing, re-sewing the original ties to the new cover saves a season of straightening pads by hand.
The two charted swivels split the range. The Edington swivel lounge chair belongs to a porch line built around movement — it turns beside a two-seat 48-inch glider bench and a matching ottoman, and its seat runs a few inches roomier than typical lounge chairs. The Spring Haven swivel is the companion piece to one of Hampton Bay’s best-selling deep-seating lines, carrying the same 23.5-inch seat width as the rest of the family under that 7-inch signature back.
Swivel bases need no special cut — the same seat-and-back formula as any lounge chair, just the right numbers. Measure the seat top edge to edge with the pad off, then the back at its widest and tallest points.
Hampton Bay swivel chair sizes — both series, one chart
Seat and back figures for both charted Hampton Bay swivel chairs — width, depth/thickness, all inches, straight from the series pages. The series name links to its full line chart.
Measure before you order
Four numbers cover a swivel chair: seat width, seat depth, cushion thickness — each taken edge to edge on the old pad — plus the back’s width and height. Note where the original ties sit before you discard anything. Full walkthroughs live here.
Piece-type siblings: the Hampton Bay lounge chair chart (18 series) and the ottoman chart (12 series). The full series index sits on the Hampton Bay page.
Fabric options & estimated pricing
Same measured cut, every fabric one price. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws. Weighing fabrics? The fabric menu inside the order flow — the cut is identical, every fabric one price.
Pricing shown is per complete swivel chair — seat and back, made to order. Nothing is cut before the final quote is confirmed.
Frequently asked questions
Do Hampton Bay swivel chairs need a special cushion cut?
No — the same seat-and-back formula as any lounge chair, just the right numbers. What a swivel base changes is behavior in service: the pad rotates with use, so keeping the original tie positions matters more here than on a static frame.
How thick is the Spring Haven swivel back?
Seven inches — the thickest back cushion in our measured library and the line’s signature. It’s what gives Spring Haven its wrapped, upholstered look; don’t substitute a standard back.
Why do only two series appear on this chart?
Because only two charted Hampton Bay series ship a swivel lounge chair — Edington and Spring Haven. Other Hampton Bay pieces turn up on swivel bases across model years; if yours isn’t listed, send the label photo and measurements and we cut custom.
My swivel chair feels wider than standard — what should I check?
The Edington swivel runs 25.25 inches wide on a 26.5-inch deck, a few inches roomier than typical lounge chairs, so generic cushions won’t fit. Measure your own seat top before ordering anything labeled “standard.”
How much do Hampton Bay swivel chair cushions cost?
Complete swivel sets (seat + back) span roughly $332 to $376 across the two charted series at every fabric one price, depending on dimensions and foam density (35D to 65D). Nothing is cut before the final quote is confirmed.
How long do custom swivel cushions take?
Every set is cut and sewn after you order — crafted in 4–7 business days, rush service 3–5 business days, then flat-rate shipping to your door.
What you get ordering from us
- Custom cushion factory for 10+ years — we cut, fill, and sew every order ourselves. Nothing is brokered or dropshipped.
- Before any fabric is unrolled, the measurements you sent are re-verified — three numbers per cushion, checked against the piece count.
- Nothing is stocked — any fabric, any piece, one cushion or forty.
- Outside ±½″ (±¾″ beyond 36″) on our cut, wrong fabric, or wrong build — remade free of charge.
Hampton Bay swivel chair cushions from $332 — four steps to a quote.
Not sure about a size? Upload a photo and we’ll confirm the series and figures before cutting.
A fresh rebuild on the swivel frame
Swivel club chairs take a beating on concrete patios. Flat, firm slate-blue pads rebuild the seat without the puffy look of big-box originals – measured to your frame, not to a size chart.
