Brown Jordan Florentine Replacement Cushions
Florentine is Brown Jordan’s mid-century cast-aluminum classic — and one of the few lines whose replacement pieces still carry reference SKUs and prices. Here is what the chart says, and how a measured rebuild runs.
The Florentine line at a glance
Florentine belongs to the classic cast-aluminum era of Brown Jordan — the Tamiami-and-Florentine generation whose sculpted metal frames defined American patio design. The line runs arm chairs, chaises, club chairs and ottomans, with reference SKUs (CL862–CL866) that dealers and parts sellers still quote.
So we don’t guess. Confirm the line with the cues below, measure the old pad or the seat deck, and we cut Florentine replacement cushions to your figures in any of 119 fabrics — acrylic covers true to the original look, 45–60D cores, built by the workshop that ships them.
Check three things: (1) the frame — Brown Jordan cast aluminum carries foundry marks and the design vocabulary of the era; (2) the SKU — CL862 (arm chair), CL863 (chaise), CL865 (club), CL866 (ottoman) circulate on parts references; (3) your dealer or estate paper — these pieces were sold through design channels. Our full measuring guide walks you through it.
How to tell you have the Florentine
Start with the metal: Florentine-era Brown Jordan is sand-cast aluminum with sculpted, organic detailing — frames light enough to lift, detailed enough that no import copy matches the molding.
Lean on the SKU: the reference chart below carries CL-numbers and as-listed prices for the four core pieces. A parts seller listing or an old order that quotes a CL-number settles the piece outright.
Don’t confuse it with: Venetian and the later Trentino-era cushion collections with deeper lounge profiles — and with the sling lines, which never carried loose pads at all.
Era matters: these frames are decades old and routinely outlive their foam by half a lifetime — foam crumble after decades of sun is the Florentine failure mode, and the frames stay sound through the rebuild.
The Florentine reference chart, as listed
Parts references publish the core Florentine pieces with SKUs and prices — the reference figures:
As-listed reference rows — note the original construction reads 2″ foam plus fiber, which is why originals flatten early. A rebuild in 45–60D foam changes the lifespan; the cut is still your tape, not the chart.
No SKU on the paper? Send a photo of the frame — the casting detail names the era fast.
Measure before you order
Measure first: three minutes with our measuring guide — width, depth, and thickness at the seam, per cushion. Every Florentine cushion we sew is cut to your figures and nothing else.
The full catalog background — eras, Venetian, the current lines — sits on the Brown Jordan page.
Fabric options & estimated pricing
Same measured cut, every fabric one price. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws. For the classic patio look the solution-dyed acrylic route is the one that stays true to the original.
Custom cushions are estimated from $158 per typical piece and scale with size and foam density (35D to 65D) — every fabric one price, the final quote settled at checkout, nothing cut before your numbers are confirmed. Covers close with a zippered closure (covers remove for washing).
Frequently asked questions
Does Brown Jordan still sell Florentine cushions?
Reference pieces still list at parts sellers — chaise pads at $249, club sets at $225, as listed. Those prices track the original thin-loft construction; a rebuild means density you choose and your own numbers.
Will universal cushions fit a Brown Jordan Florentine piece?
Poorly at best — mid-century seats, 77″ chaise runs and curve-front profiles match no stock chart. Measured replacements sit the way the originals did.
How do I confirm my set is really Florentine?
The CL-number on a parts reference or order paper names the piece; the sand-cast detailing names the maker.
Can you make cushions without official specs?
Yes — that is our normal route for uncharted lines. You measure width, depth, and thickness per cushion; we re-verify the numbers against the piece count before cutting and sew to your figures.
How much do Florentine replacement cushions cost?
Custom pieces are estimated from $158 per typical piece and scale with size and foam density (35D to 65D) — every fabric one price, final quote confirmed before anything is cut.
How long do they take to make and ship?
Every set is cut and sewn after you order — crafted in 4–7 business days, rush service 3–5 business days, then flat-rate shipping to your door.
What you get ordering from us
- Custom cushion factory for 10+ years — we cut, fill, and sew every order ourselves. Nothing is brokered or dropshipped.
- Before any fabric is unrolled, the measurements you sent are re-verified — three numbers per cushion, checked against the piece count.
- Nothing is stocked — any fabric, any piece, one cushion or forty.
- Outside ±½″ (±¾″ beyond 36″) on our cut, wrong fabric, or wrong build — remade free of charge.
Florentine replacement cushions estimated from $158 per piece — confirm the SKU, measure, quote in 4 steps.
Build My Florentine Cushions →
Not sure which era you own? Upload a photo and we’ll confirm before we cut. Not a Florentine after all? Any shape, custom built — or start from the Brown Jordan index.