OW Lee Monterra Replacement Cushions — Custom Cut to Your Measurements

O.W. Lee’s widest current program — seventeen piece types from spring-base loungers to sectionals — and not one published cushion dimension among them. Here is how the Monterra maps by piece code, and how replacements get built from three figures off your own furniture.

Open the Customizer — Outdoor Preselected →

Monterra: line overview

Monterra is the closest thing O.W. Lee has to a flagship: a current deep-seating collection with the fullest piece list the factory runs — lounge chairs (OW-21-CC), spring bases, swivel rockers, adjustable chaises, love seats including a crescent, three-seat sofas, sectionals, club dining (OW24), dining chairs and swivel stools (OW04), and a family of ottomans, plus an Urban Scale variant sized for tighter patios. At dealers we checked, the OW-21-CC lounge cushion set lists at $945.20 on an 18–20 week custom order, with fabric grades adding more.

Nothing here rides on memory. The piece codes below certify Monterra frames, the tape supplies three figures per block, and the build follows those numbers in whichever of 119 upholstery options you choose — sewn and boxed by the same floor.

Certification runs top-down: the build — hand-forged scrollwork over heavy-gauge frames, which no import line copies convincingly; the badge — O.W. Lee fits a brass plaque or a stamped mark to every frame on the floor; the file — the brand distributes through a nationwide dealer body, not big-box shelves, so an invoice or order history carries the collection name verbatim. Our taping walkthrough handles the rest.

Confirming Monterra ownership

Read the lofts: Monterra is deep seating — original pads run around 5–6″ thick with curved armrests, on hand-forged frames in the factory’s traditional weight class. If your seat deck is broad, the pad is tall, and the frame carries the brass O.W. Lee plaque, you’re in the right family.

Use the piece codes: Monterra’s piece list is charted — OW-21-CC lounge chair, OW-21-SR spring base, OW-21-SR swivel rocker, OW28-CH adjustable chaise, OW272-2S love seat, OW262-2S crescent love seat, OW273-3S three-seat sofa, OW25 sectionals, OW24 club dining, OW04 dining and stools. A code on your invoice or a dealer lookup maps straight to the piece.

Don’t confuse it with: Horizon, the other line in O.W. Lee’s deep-loft family, and Monterra Urban Scale — the same design at reduced proportions for smaller patios. Urban Scale pads do not match full-scale ones; check the variant before you measure.

Channel arithmetic: the factory services Monterra replacements through dealers on an eighteen-to-twenty-week ticket, while the factory-store clearance page moves leftover pads in current-season cloth, sized as listed. A mill cut covers single blocks from your figures, without the full-set wait.

Why Monterra has no factory size chart

Monterra is charted by piece code, yet the cushion dimensions behind those codes have never been printed — replacement orders run through dealers against internal factory records, on the eighteen-to-twenty-week ticket we quoted above. We keep the size table out on purpose all the same: codes tell you which blocks your piece takes; your three dimensions per block are the only figures that reach the bench.

No badge on the rail, no file for the set? Send photos of the piece and we will place it in the Monterra range — each block then needs its own three dimensions and the commission starts.

The measuring step

Per block, with the codes beside you: width, depth and seam thickness for every pad position, our measuring guide open as reference, figures logged individually — a sectional run measured as one pad is where rebuilds fail. No dimension sheet exists, so your entries are the entire specification behind each Monterra block we sew.

Closest O.W. Lee neighbors: Aris (current modern aluminum seating) and Cambria (the retired traditional line with the crescent loveseat). Browse every O.W. Lee line on the brand hub.

Fabric options & estimated pricing

Scale the cover to the block, not the budget bump: cotton linen on hard-working dining seats, tech fabric where the deep-seating run meets weather — water-resistant, wipe-down clean — and premium velvet across the lounge core for the flagship look, claws accounted for. the fabric wall in the order flow holds every bolt to one rate over the same measured cut.

Blocks price from $168 at typical scale and move with size and density — 35D through 65D — while the fabric book stays price-flat. The configurator’s final figure is the binding one; nothing reaches the bench ahead of confirmed numbers. Every cover unzips for the wash.

Monterra piece structure, catalog edition

Monterra is the current flagship deep-seating line, and uniquely among O.W. Lee collections, its piece structure is public: the dealer listings carry it as a numbered system. Lounge chair OW-21-CC, with spring base OW-21-SB and swivel rocker OW-21-SR as its companion builds; adjustable chaise OW28-CH; loveseat OW272-2S; crescent loveseat OW262-2S; three-seat sofa OW273-3S; sectional blocks OW25-L, OW25-R and OW25-C; club dining pieces OW24-A and OW24-SR; dining chairs and swivel stools through the OW04 series; ottomans as OW-19-O, round OW-22-O and double OW-112-2O.

That SKU map is the best identification tool in the brand — if your dealer invoice or frame tag carries a number in those families, the piece is Monterra and the block role is known before any photo is taken. But read the map for composition, not for sizes: no inch figures have ever been published for this line, so the numbers tell you which blocks your piece takes (a sectional arm, a wedge, a chaise extension) while your own three measurements per block remain the only figures that reach the cutting table.

Deep seating is where block discipline pays. A Monterra sectional is not one pad; it is a run of blocks that must meet at the seams without ridges, and the difference between a good rebuild and a frustrating one is usually a full set of seam-to-seam figures taken from the old pads while they are still on the frame. The crescent loveseat OW262-2S repeats the curved-front rule: width along the seam and width straight across, both at the same depth.

The design brief behind the line

Monterra was drawn for the open-ended patio: generous seats, commanding silhouettes, room for a crowd. That intent is why the pads run thick and why replacements on this line carry the most at stake — a full sectional re-cushioning is a significant order, and it deserves the ten minutes with a tape that guarantees it. The authorized channel quotes long production windows on these sets; a measured rebuild from your figures turns that wait into days, in any fabric on the wall, at a flat per-piece figure the configurator shows before you commit.

Frequently asked questions

Are Monterra replacements available from OW Lee?

Yes — Monterra is current, and the factory sews replacements through dealers: $945.20 for the OW-21-CC lounge set where we priced it, fabric grades $113–$721 beyond that, 18–20 weeks out. The factory-store clearance shelf lists leftover pads as sized. What a mill adds: single blocks, 119 fabrics at one rate, days rather than seasons.

Are universal replacement pads viable for Monterra pieces?

Not on deep seating at this scale. O.W. Lee decks run deep and block-specific — a universal that clears width fails depth or loft, and no stock piece traces a curved front or a sectional radius. Per-block figures are what the rebuild depends on.

How do I establish my pieces are Monterra?

The piece codes do it: OW-21-CC, OW24-A, OW04-series and the rest of the charted list map straight from your invoice to the piece. Without paper, the 5–6″ lofts, curved armrests and brass plaque place it in the deep-seating family.

Can you sew pads with no official size data?

Yes. Per-block dimensions — width, depth, seam thickness — supplied from your tape; our verification runs them against the piece count before anything is shaped; the build then follows your figures, codes or no codes.

What do Monterra pads cost to rebuild?

Blocks price from $168 at typical scale; size and foam density (35D through 65D) set the figure, and the fabric book stays flat. The number is confirmed prior to any cutting.

What’s production plus delivery time?

Blocks are cut after the order lands: 4–7 business days standard, 3–5 rush, flat-rate freight home — the whole run inside 3–6 weeks.

The workshop’s side of the deal

• Ten-plus years behind the machines — orders are cut, filled and sewn where they’re placed; no brokerage, no dropship handoffs.
• Blocks are confirmed before bolts are opened — your three entries per pad, verified against the piece count on our side of the order.
• No ready-made inventory exists here — any cloth on the wall, any block type, one piece or a forty-piece sectional.
• Blocks cut outside ±½″ (±¾″ beyond 36″), or sewn in the wrong cloth or the wrong build — each one remade at no charge.

Monterra blocks from $168 per piece — map the codes, tape the pads, lock the quote.

Build My Monterra Cushions →

Codes not matching up? Send the frame photos — we place the block family before cutting. Not Monterra hardware? Any shape, to order, or scan the OW Lee range.