Start with your shape
Not sure? Pick the closest — every measurement is confirmed before we cut.
Don't see your shape? We make any shape.
Straight edges? A top photo + the edge numbers is all we need. Curved? Trace it on paper next to a tape measure and email us a photo.
Enter your measurements
Measure the old cushion flat, edge to edge — never the frame.
Choose your fabric
Five families, 119 cuts, one flat rate — pick by look and feel. Click a family to see its swatches below, or its ⓘ for what the fabric is and where it works best.
All covers cut to your exact dimensions — no stock sizes, zippered covers that remove for washing.
Review & order
Calculated live from your measurements — every line, no surprises.
Free shipping over $158 · $29 flat below
Estimates only — we re-verify every dimension before cutting and will contact you if anything looks off. Prefer email? Email me this quote
Odd shape or tricky frame? Upload a photo of your furniture or old cushion — one overall shot, plus a top and side view of the old cushion if you can.
JPG, PNG or WebP · up to 10 MB each · max 3
Cut and sewn by the factory that ships them — no middlemen.
One price for every fabric. Pick by look, not budget.
Every dimension re-checked before cutting. Outside tolerance, remade free.
If we cut it wrong, we remake it — no arguments.
Factory Direct — The workshop that cuts it is the one that ships it
119 Fabrics — Every fabric on the list, open in the configurator
±½″ Tolerance — Measured cuts, not stock-chart guesses
Remake Free — Miss on our side and the remake is free
Charleston — a Hampton Bay series guide (identify & re-cushion, 2026)
No published spec sheet for the Charleston line — here’s how to confirm yours and order replacement cushions cut to your own three measurements.
The Charleston line at a glance
Charleston is one of Hampton Bay’s longer-running Home Depot lines, and it commonly turns up in one of two builds: a cast-aluminum dining group with ornate scrollwork backs in a dark powder-coat, or an all-weather wicker deep-seating group in warm brown weaves. Both shipped as boxed sets — dining chairs, swivel rockers, sofas, ottomans depending on the season — which is why “Charleston cushions” alone never tells us what to cut.
So we don’t guess. Confirm the line with the cues below, measure the old pad or the seat deck, and we cut Charleston replacement cushions to your figures in any of 119 fabrics — built by the workshop that ships them.
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual, searchable by “Charleston”; (3) the frame itself — cast-aluminum scrollwork and wicker weaves each narrow the list. Our full measuring guide walks you through it.
How to tell you have the Charleston
If your chairs are metal: Charleston dining pieces are most often cast aluminum with a repeating scroll or medallion motif pressed into the backrest, finished in black or oil-rubbed bronze. The arms flow in one continuous curve — no separate arm caps, no vertical slats. Weight is the giveaway: cast aluminum feels denser than the hollow tubular-steel frames on Hampton Bay’s cheaper stacking lines.
If your set is woven: Charleston wicker groups commonly run a wide, half-round resin weave in mixed brown tones over an aluminum frame, with thick rolled arms and deep seat decks. The weave is machine-uniform — the same strand width on every panel — which separates it from hand-woven lookalikes sold the same seasons.
Don’t confuse it with: Hampton Bay’s Santa Rosa line (also cast aluminum, but with straight ladder-back slats instead of scrollwork), and wicker deep-seating lines like Tobago — those run boxier, squared-off arms. When the label is gone, the model number on your Home Depot receipt or order history settles it in one search.
Seasons matter: Home Depot refreshed Charleston across model years — same series name, slightly different arm profiles and cushion lofts. Two “Charleston chairs” bought three years apart can take different pads, which is exactly why we cut to your measurements instead of a single assumed chart.
Why there is no official Charleston size chart
Hampton Bay doesn’t publish spec sheets for every line — Charleston’s cushion dimensions were never charted in an official manual, and the numbers floating around retail listings describe the whole furniture set, not the pads. Rather than republish guesses, we leave the size chart out on purpose: measure your own piece and we cut to your numbers.
Tag gone and receipt lost? Send a photo of the frame and we’ll help narrow the line — then it’s three numbers per cushion and your order is in production.
Measure before you order
Measure first: three minutes with our measuring guide — width, depth, and thickness at the seam, written down per cushion, not per set. Without a factory chart these three numbers are the entire spec: every Charleston cushion we sew is cut to them and nothing else.
Closest Hampton Bay neighbors with live measurement charts: Beverly (deep-seating modulars) and Cambridge (five-piece dining) — each with its own dimension chart. The full 24-series index sits on the Hampton Bay page.
Fabric options & estimated pricing
Same measured cut, every fabric one price. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
Weighing fabrics? The fabric menu inside the order flow— the cut is identical, every fabric one price.
Custom cushions start from a $45 make-base and scale with size and foam density (35D to 65D) — every fabric one price, the final quote settled at checkout, nothing cut before your numbers are confirmed. Covers close with a zippered closure (covers remove for washing).
Rebuild in any fabric
Rebuild in any fabric — every custom cut runs in any of the 119 fabrics.
Frequently asked questions
Does Hampton Bay still sell Charleston cushions?
Not reliably. The line cycled through Home Depot season by season, and original pads disappear once a run ends. We rebuild Charleston cushions from scratch — to your measurements, in any of 119 fabrics.
Will universal cushions fit a Charleston chair?
Rarely well. Boxed-set furniture is cut to its own seat decks, and a universal pad that’s close in width is usually wrong in depth or loft — it slides, gaps at the back, or rides proud of the frame. Measured replacements sit the way the originals did.
How do I confirm my set is really Charleston?
The white label under the seat frame or inside an arm carries the model number (usually behind a GLD or THD supplier code); your Home Depot order history or the original manual names the series outright. The frame cues in the chart above narrow it when the tag is gone.
Can you make cushions without official specs?
Yes — that is our normal route for uncharted lines. You measure width, depth, and thickness per cushion; we re-verify the numbers against the piece count before cutting and sew to your figures.
How much do Charleston replacement cushions cost?
Custom pieces start from a $45 make-base and scale with size and foam density (35D to 65D) — every fabric one price, final quote confirmed before anything is cut.
How long do they take to make and ship?
Every set is cut and sewn after you order — crafted in 4–7 business days, rush service 3–5 business days, then flat-rate shipping to your door; plan on 3–6 weeks door to door.
What you get ordering from us
- Custom cushion factory for 10+ years — we cut, fill, and sew every order ourselves. Nothing is brokered or dropshipped.
- Before any fabric is unrolled, the measurements you sent are re-verified — three numbers per cushion, checked against the piece count.
- Nothing is stocked — any fabric, any piece, one cushion or forty.
- Outside ±½″ (±¾″ beyond 36″) on our cut, wrong fabric, or wrong build — remade free of charge.
Charleston replacement cushions from a $45 make-base — identify, measure, quote in 4 steps.
Not sure which line you have? Upload a photo and we’ll confirm before we cut. Not a Charleston after all? Any shape, custom built — or start from the Hampton Bay index.
Shipping & Delivery
- Orders over $158 ship free — add a second cushion or an upgrade and shipping’s on us.
- Smaller orders ship anywhere in the contiguous US for one simple flat fee — always shown before you pay.
- Made in 7–14 business days. Each cushion is cut and sewn to your measurements after you order, never pulled from a shelf.
- ±½″ tolerance on all custom cuts — and if we cut it wrong, we remake it free. No forms, no fine print.
Have a deadline? Contact us before ordering and we will tell you honestly whether we can meet it.
Related products
Custom Outdoor Bench Cushions
- Cut to your exact measurements — patio, garden and deck benches.
- 119 performance fabrics at one price — full-sun and quick-dry outdoor lines included.
- One order, one dye lot — every piece in the run ships color-matched.
- Factory-direct from $130 — instant quote in the customizer below.
- ±½″ tolerance, re-checked before cutting — remade free if we cut it wrong.
Custom Outdoor Seat Cushions
- Cut to your exact measurements — wicker, wrought iron, wood and lawn frames, any seat deck.
- 119 performance fabrics at one price — full-sun and quick-dry outdoor lines included.
- One order, one dye lot — every piece in the run ships color-matched.
- Factory-direct from $113 — instant quote in the customizer below.
- ±½″ tolerance, re-checked before cutting — remade free if we cut it wrong.
Replacement Patio Cushions
- Replacement patio cushions cut to your measurements — one seat pad or the full set, no minimum.
- 119 fabrics at one price — solution-dyed acrylic, olefin blends and covered-porch weaves in one order.
- Quick-dry reticulated foam for uncovered sets — drains in seconds, dries in hours.
- Measured shelves for Hampton Bay (24 series) and Martha Stewart (7 series) patio lines.
- Cut to a ±½" tolerance — outside it, remade free, any time. From USD 94 a seat.
Reviews
There are no reviews yet.