20" x 20" Outdoor Cushions – Custom Made to Your Exact Size

W 20" D 20" T 3" side view 20 × 20" deck footprint — measure seam to seam

Cut to your measurements — width, depth, and thickness — not to a stock chart. Factory-direct, no minimums.

“Twenty by twenty” is outdoor cushion folklore — the size everyone believes is standard. In practice, our measurement library shows factory originals running from 19.5 to 20.25 inches on pieces labeled 20-inch, because each factory cut to its own frame. That spread is why stock replacements disappoint so reliably at this size: a 19.5-inch pad gaps in a 20.25-inch deck, and the reverse never sits flat.

We cut 20 x 20 outdoor cushions to your measurements, to the quarter inch, and the price is the same whatever number you enter. Nine library entries now chart this square and its nearest factory sizes — seats and backs from Charlottetown, Lake Adele, Melbourne, Pacific Grove, Pembrey, and Verrado, plus Oak Cliff and Laurel Oaks backs awaiting re-measurement — so Hampton Bay and Martha Stewart owners can verify a match before ordering. Thickness 3 to 5 inches, three fabric tiers led by Tech Fabric, our waterproof, wipe-clean workhorse, with a sewn envelope closure. Factory-direct, made to order.

Pricing — estimated starting at

Fabric tierEstimated price*
Cotton Linen$92
Tech Fabric$110
Premium Velvet$134

*One cushion, 20 × 20 in. (2.78 sq ft top surface): $39 make-base + 2.78 sq ft × fabric rate ($19.0/sq ft, $25.5/sq ft, $34.0/sq ft). Thickness, foam density, and the sewn closure is confirmed at checkout — and every dimension is confirmed with you before we cut.

For comparison: U.S. custom-configurator specialists’ 2026 listings for made-to-order cushions in common sizes (16×16 through 24×24) run roughly $71–$119 before shipping — and most only reveal that price after a quote request. We publish the formula above so you can check the math before you order.

Fits these furniture series

Factory-original cushions measured at 20 ± 1½″ × 20 ± 1½″ — 9 pieces across 8 furniture series. If your set is listed, click through for the full piece-by-piece chart.

SeriesPiecePartFactory size (W × D × T)
CharlottetownRocker ChairSeat19.75 × 19.5 × 4 in. measured
Lake AdeleChat ChairBack21 × 21 × 2.5 in. measured
Lake AdeleChat ChairSeat21 × 19 × 3.5 in. measured
MelbourneOttomanOttoman21 × 19 × 4 in. measured
Pacific GroveDining ChairSeat21 × 21 × 3.5 in. measured
PembreyOttomanOttoman19.5 × 18.5 × 5.5 in. measured
VerradoDining ChairBack21.5 × 19 × 5 in. measured
Oak CliffDining ChairBack20 × 20 × 3.5 in. (pending verification)
Laurel OaksDining ChairBack20 × 19.5 × 4.75 in. (pending verification)

Matching tolerance: width and depth each within 1.5 in. of 20 x 20. Entries marked measured are factory-original pieces from our measurement library; entries marked (pending verification) await re-measurement. Every dimension is re-verified against your order before we cut. We are not affiliated with the brands listed — names are used for fit identification.

Exact fit in any size — get an instant quote.

Measuring tips for a 20 x 20

  • Old cushion flat on a table: width edge to edge, depth front to back, thickness seam to seam — never squeezed.
  • Factory “20 inch” pads run 19.5–20.25 — trust your tape measure over any label.
  • Photograph the label under the frame — a model number can match you to a documented series chart.

Full walkthrough with photos: How to Measure (and Identify) Your Cushions.

Foam thickness for a 20 x 20

Twenty-inch squares are the patio default — dining chairs across a decade of big-box sets, wicker dining squares, bistro oversize. Thickness 2.5–3 inches keeps table height; 3 is the comfortable standard; 4 only on low frames. The recline-and-slide problem shows up here too: tie positions belong on the order.

Density: 35D seasonal, 50D daily, high grades for lounge duty. Confirmed with your dimensions before cutting, same tolerance as every size.

Fabrics that suit a 20 x 20

Open-air default is Tech Fabric — waterproof, wipe-clean, sun-tolerant. Cotton Linen for covered porches; Premium Velvet for screened rooms. Wicker variants and the tier-by-tier climate logic live in the outdoor fabric guide.

Premium Olefin · Orange

Striped Canvas · Light brown

Striped Canvas · Blue

From the 119-fabric swatch library — free samples ship with every quote.

Frequently asked questions

Why do “20 x 20” cushions vary between brands?

Because factories cut to the frame, not the label — our library shows originals from 19.5 to 20.25 inches on nominal 20-inch pads. Measure your old cushion flat, edge to edge, and we match that number.

Can I get a zipper added?

No — our covers close with a sewn envelope closure (no zippers on our line); spot cleaning handles daily life.

What fabric options are available?

Three tiers, at every size: Tech Fabric, our waterproof, wipe-clean leather-like weave — the outdoor workhorse; Cotton Linen, a durable everyday weave with no pilling, shrinking, or fading, best under covered patios and indoors; and Premium Velvet, plush high-density velvet with a claw-resistant weave for indoor luxury. A 16-inch square gets the same fabrics as a 60-inch bench pad.

What series use a 20 x 20 seat cushion?

Several documented lines — Melbourne ottomans, Middletown and Pacific Grove dining chairs, Lake Adele chat chairs. The fits table below lists the near-squares; click through for full charts before measuring.

Will a 20 x 20 pad fit Adirondack chairs?

A standard Adirondack seat is 19–21 inches square, so dimensionally close — but tie placement and slat gaps are what actually fit. See Adirondack chair cushions for the tie logic.

Do 20 x 20 cushions ever go on clearance?

Not here — nothing is stocked, so nothing needs clearing. Each pad is cut after you order it, which is why a made-to-order 20 x 20 is never out of stock and never a leftover color. Clearance bins exist to move pads cut for discontinued frames; this is the opposite business.

Why there is no 20 x 20 clearance bin

“Clearance” in the cushion trade means one thing: a line is discontinued and the warehouse is emptying. The pads were cut to frames that no longer sell, in colors that did not move, at sizes that fit whoever bought them first. That is why clearance hunting at a specific size — twenty by twenty, or any square with a number attached — fails so reliably: you need one size, and the bin holds every size except yours.

Made-to-order inverts the logic. Nothing is warehoused, so nothing needs clearing: your pad is cut when you order it, in the fabric you picked, at the number you measured. The honest comparison is not clearance price versus custom price — it is the cost of two wrong clearance pads against one right one. The formula is published above so the math is yours to check before ordering.

Ordering 20 x 20 pads as a set

Dining sets are the usual reason: four, six, or eight chairs that took the same square when they left the factory. Search behavior matches — “set of 6” rides with this size as often as with any small square. One order, one fabric run, every pad cut to the same numbers; head chairs that measure an inch wider (common on older sets) get their own line item in the same run rather than rounding down to match the herd.

Thickness across a set: whatever you pick applies to every chair, because a mixed-height dining set is visible from across the yard. Three inches is the dining standard at this square; two-and-a-half keeps tight tables workable; four belongs on slow-dinner frames.

Close sizes: 19, 21, and the rounding trap

The inch on either side of 20 is real territory. Nineteen is a documented search size in its own right; twenty-one runs on wicker dining and chat frames; the library holds originals at this square from 19.5 to 20.25. The trap is rounding a 19.75 deck up to 20 — a quarter inch of overhang at the front rail shows on every slat frame, and a half inch starts riding up at the corners. Order the number you measured: 19.75 costs the same as 20 here, and fits like nothing off a shelf.

Ready when you are. Enter your measurements, pick a fabric tier and your finishing — every dimension comes back to you for confirmation before we cut. One cushion or a whole set, from the factory that ships them. Cut to within ½ inch of your confirmed numbers — outside tolerance, remade free.