24" x 24" Outdoor Chair Cushions – Custom Made to Your Exact Size
Cut to your measurements — width, depth, and thickness — not to a stock chart. Factory-direct, no minimums.
The outdoor chair cushion market is built around three numbers, and 24 is the biggest of them — the seat square of deep-seating lounge chairs, wide swivel rockers, and patio armchairs built for real lounging. Chairs at this width were sold by every major brand for two decades, which is why “outdoor chair cushion” gets searched tens of thousands of times a month and why stock pads at this size are everywhere and right for almost no one.
We cut 24 x 24 outdoor chair cushions to your measurements — your width, depth, and thickness, sewn to the quarter inch. Seven factory originals in our library sit at this square (Lily Bay, Windsor, Riley, Beachside modules), charted below so replacement buyers can verify a match first. Fabrics from Cotton Linen through Tech Fabric, our waterproof, wipe-clean workhorse, to Premium Velvet; sewn envelope closures for a clean, tailored look. Factory-direct, made to order, no minimums.
A note on pages: this one covers the chair build at 24 x 24 — seat squares on frames you sit in. The 24 x 24 outdoor page is the family hub with the full thickness and set-ordering logic, and 24 x 24 patio covers whole-set builds. Same cutting floor, same formula; the pages exist because you searched different words.
Pricing — estimated starting at
| Fabric tier | Estimated price* |
|---|---|
| Cotton Linen | $115 |
| Tech Fabric | $141 |
| Premium Velvet | $175 |
*One cushion, 24 × 24 in. (4.00 sq ft top surface): $39 make-base + 4.00 sq ft × fabric rate ($19.0/sq ft, $25.5/sq ft, $34.0/sq ft). Thickness, foam density, and the sewn closure is confirmed at checkout — and every dimension is confirmed with you before we cut.
For comparison: U.S. custom-configurator specialists’ 2026 listings for made-to-order cushions in common sizes (16×16 through 24×24) run roughly $71–$119 before shipping — and most only reveal that price after a quote request. We publish the formula above so you can check the math before you order.
Fits these furniture series
Factory-original cushions measured at 24 ± 1½″ × 24 ± 1½″ — 15 pieces across 10 furniture series. If your set is listed, click through for the full piece-by-piece chart.
| Series | Piece | Part | Factory size (W × D × T) |
|---|---|---|---|
| Lily Bay | 6-Piece Set | Seat | 24 × 24 × 5 in. measured |
| Lily Bay | Lounge Chair | Seat | 24 × 24 × 5 in. measured |
| Riley | Lounge Chair | Seat | 24 × 24 × 3.5 in. measured |
| Riley | Sectional | Seat | 24 × 24 × 3.5 in. measured |
| Melbourne | Lounge Chair | Seat | 24 × 25 × 4 in. measured |
| Middletown | Lounge Chair | Seat | 24 × 25 × 5.5 in. measured |
| Verrado | Club Chair | Seat | 24 × 25 × 6 in. measured |
| Verrado | Loveseat | Seat | 24 × 25 × 6 in. measured |
| Chateau | Lounge Chair | Seat | 24 × 25.5 × 5 in. measured |
| Chateau | Sofa | Seat | 23.5 × 25.5 × 5 in. measured |
| Edington | Swivel Lounge Chair | Back | 24.5 × 22.5 × 5 in. measured |
| Lake Adele | 6-Piece Set | Seat | 23 × 23 × 5 in. measured |
| Windsor | Lounge Chair | Seat | 24 × 24 × 4 in. (pending verification) |
| Windsor | Sofa (3 Seat) | Seat | 24 × 24 × 4 in. (pending verification) |
| Beachside | Sectional (Loveseat Section) | Seat | 24.41 × 24.41 × 5 in. (pending verification) |
Matching tolerance: width and depth each within 1.5 in. of 24 x 24. Entries marked measured are factory-original pieces from our measurement library; entries marked (pending verification) await re-measurement. Every dimension is re-verified against your order before we cut. We are not affiliated with the brands listed — names are used for fit identification.
Exact fit in any size — get an instant quote.
How to measure a 24 x 24 cushion
- Old cushion flat on a table: width edge to edge, depth front to back, thickness seam to seam — never squeezed.
- Chair backs are a separate pad — measure seat and back individually and order both in one batch.
- Photograph the label under the frame — a model number can match you to a documented series chart.
Full walkthrough with photos: How to Measure (and Identify) Your Cushions.
More measuring help: How to measure radius corners · 9 cushion measurement mistakes that cause remakes
Thickness and density at 24 x 24
The 24-inch square is the defining outdoor seat module — lounge chairs, club chairs, sectional seats, swivel frames. Five inches is the deep-seating standard; 6 plush; below 4.5 dishes. Backs run the seat width at 18–26 high with 4–7 of loft, often wedge-profiled.
Density: 50D daily, 60D nap-grade, 65D for swing-bed and daybed duty. Order seats and backs in one run so loft and dye lot agree across the set.
Fabric Options at 24 x 24
The most-exposed patio squares want the workhorse tiers: Tech Fabric open-air (waterproof, wipe-clean), Cotton Linen covered, Premium Velvet indoors. The outdoor fabric guide and the Sunbrella-grade performance tiers page cover the honest comparisons.
Teddy Velvet · Cyan-blue
Corduroy · Blue
Axroma Canvas · White
From the 119-fabric swatch library — free samples ship with every quote.
Frequently asked questions
What’s the difference between 24 x 24 seat and outdoor chair cushions?
Nothing in the product — both are custom-cut squares. The pages organize how you search; the order form takes your exact measurements either way.
What fabric options are available?
Three tiers, at every size: Tech Fabric, our waterproof, wipe-clean leather-like weave — the outdoor workhorse; Cotton Linen, a durable everyday weave with no pilling, shrinking, or fading, best under covered patios and indoors; and Premium Velvet, plush high-density velvet with a claw-resistant weave for indoor luxury. A 16-inch square gets the same fabrics as a 60-inch bench pad.
Can I get a zipper added?
No — our covers close with a sewn envelope closure (no zippers on our line); spot cleaning handles daily life.
Is this page different from 24 x 24 outdoor cushions?
Same cut, different search door — buyers typing “chair” usually want single-seat modules and tie guidance; the 24 x 24 outdoor page serves the wider word. The fits table below is the shared library view either way.
Can 24 x 24 cushions work on swivel lounge chairs?
Yes — swivel frames run near this square; the build note is attachment: an anti-slip underside or ties to the rotating deck, never to the base (they twist and snap). Edington’s swivel lounge is a documented example.
How do I keep a 24 x 24 cushion on a swivel chair?
Fasten to the deck that rotates, not the base that stands still — ties through the deck’s own gaps, positioned where the swivel mechanism leaves room. A pad tied to the stationary base cinches and twists off its seat within a week of normal use.
Which chairs take a 24 x 24 seat
The square is a module, but the frames around it differ — and the differences are what make a pad fit or float. The working matches at this size:
| Chair type | Fit at 24 × 24 | What to check before ordering |
|---|---|---|
| Deep-seat lounge chair | The reference fit — most library entries are these | Seat depth past 23″; back height for the back pad |
| Swivel / swivel rocker | Common on wide-base frames | Round or square deck; fastening on the rotating deck |
| Wicker lounge chair | Frequent — woven frames run deep decks | Taper: front-wider decks need a trapezoid cut |
| Oversized dining armchair | Where armchairs grew to lounge scale | Table height: 3–4″ keeps knees under the table |
| Club chair (covered patio) | The Verrado build — 24 × 25 in the library | Depth runs a touch past 24; measure, don’t assume |
One caution the table hides: two chairs with the same seat square can need different thicknesses. A dining-scale armchair wants 3–4 inches so the table still works; a lounge frame wants its full 5. The square tells you the footprint; the frame tells you the build.
Ties, and staying put on a wide deck
A 24-inch square catches more wind than any smaller pad — area grows with the square of the side, and the gust that lifts an 18-inch pad walks a 24-inch one off the frame entirely. The working answers are mechanical: ties sewn into the seam at your measured slat or weave gaps, two rear ties for sheltered chairs and four for anything open to weather, with the fastening points noted on the order so ties land on actual openings rather than solid rails. On smooth decks — resin, metal, composite — the underside specification does the work ties cannot; both are confirmed with your dimensions before anything is cut.
