Oak Cliff Replacement Cushions for Hampton Bay (2026 Custom-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Collected reference measurements for every piece of the Hampton Bay Oak Cliff line — measured from OEM & supplier listings.
The Oak Cliff line at a glance
Oak Cliff is a full-spectrum Hampton Bay line from Home Depot — deep seating (lounge chair, loveseat), a chaise, a dining set, and an ottoman. Two details set it apart: the chaise runs on plusher 5.5-inch cushions while the rest of the line uses 5", and the dining chairs carry slimmer 3.5" pads — so one set can hold three different cushion profiles, and mixing them up is the classic ordering mistake.
We cut every Oak Cliff piece to the original factory dimensions below, profile by profile, in cotton linen, tech fabric, or premium velvet — made by the factory that ships them.
Oak Cliff cushion sizes — full chart
Custom-fit measurements for the full Oak Cliff line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Lounge Chair | Seat | 1 | 23 × 24 × 5 |
| Lounge Chair | Back | 1 | 23 × 22.5 × 5 |
| Loveseat | Seat | 2 | 23 × 24 × 5 (two separate cushions, each 23" wide) |
| Loveseat | Back | 2 | 23 × 22.5 × 5 (two separate cushions, each 23" wide) |
| Chaise Lounge | Seat | 1 | 24.5 × 48.5 × 5.5 |
| Chaise Lounge | Back | 1 | 24 × 27.5 × 5.5 |
| Dining Chair | Seat | 1 | 21 × 19 × 3.5 |
| Dining Chair | Back | 1 | 20 × 20 × 3.5 |
| Ottoman | Ottoman | 1 | 23.75 × 22.25 × 5 |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Oak Cliff? See how to measure your cushions and match the numbers.
Is your set really Oak Cliff?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — a 24.5" × 48.5" chaise seat on 5.5"-thick pads — the only 5.5" piece in the line — is the Oak Cliff tell. Our full measuring guide walks you through it.
Fabric options
Same custom-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — especially on the chaise: confirm both the 48.5" length and the 5.5" thickness, because a standard 5" replacement leaves the edge low.
Get your Oak Cliff cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
Why are my Oak Cliff chaise cushions thicker than the rest of the set?
By design: the chaise runs 5.5"-thick pads while lounge and dining pieces use 5" and 3.5". Don’t flatten the whole set to one number — order each piece to its row.
Will standard dining cushions fit the Oak Cliff dining chairs?
Unlikely. The seats are 21" × 19" with 20" square backs on a slim 3.5" profile — close to generic sizes, but close is what puckers. We cut to the exact original.
Is the ottoman cushion oversized?
It runs generous at 23.75" × 22.25" — a few inches deeper than most Hampton Bay ottomans. Measure the frame top before ordering.
How much do Oak Cliff replacement cushions cost?
Pricing comes from our instant quote tool — enter your piece count and dimensions for a factory-direct estimate in seconds.
How long do Oak Cliff cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Oak Cliff chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Oak Cliff order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related series
- Kampar — extra-wide 31" chaise and one-piece 45" loveseat pads
- Cedar Island — chaise, dining and a rare recliner + footrest set
- Pembrey — chaise, lounge, loveseat and a waterfall ottoman
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
