Middletown Replacement Cushions for Hampton Bay (2026 Exact-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Exact OEM measurements for every piece of the Hampton Bay Middletown line — measured from OEM & supplier listings.
The Middletown line at a glance
Middletown is a mixed-program Hampton Bay line from Home Depot: a dining chair, a lounge chair, a loveseat and a chaise — four pieces that share a family look but barely share a dimension. The loveseat uses a single one-piece 47.5-inch seat pad (rare — most lines split the seat), and the chaise carries an unusually tall 32-inch back that reads almost like a headrest.
We cut every Middletown piece to the original factory dimensions below — one-piece seat and all — in cotton linen, tech fabric, or premium velvet, made by the factory that ships them.
Middletown cushion sizes — full chart
Exact-fit measurements for the full Middletown line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Chaise Lounge | Seat | 1 | 24 × 46 × 5 |
| Chaise Lounge | Back | 1 | 24.5 × 32 × 5 |
| Dining Chair | Seat | 1 | 19.5 × 20 × 4 |
| Lounge Chair | Seat | 1 | 24 × 25 × 5.5 |
| Lounge Chair | Back | 1 | 24 × 19.75 × 5 |
| Loveseat | Seat | 1 | 47.5 × 25 × 5.5 (one-piece pad) |
| Loveseat | Back | 2 | 24 × 19.75 × 5 (two separate cushions, each 24" wide) |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Middletown? See how to measure your cushions and match the numbers.
Is your set really Middletown?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — a one-piece 47.5" loveseat seat and a chaise back that runs 32" deep — neither exists elsewhere in the Hampton Bay range. Our full measuring guide walks you through it.
Fabric options & estimated pricing
Same exact-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
| Piece (complete set) | Cotton Linen | Tech Fabric | Premium Velvet |
|---|---|---|---|
| Lounge Chair (seat + back) | $170 | $178 | $187 |
| Loveseat (1 seat + 2 backs) | $300 | $316 | $333 |
| Chaise Lounge (seat + back) | $267 | $281 | $296 |
Estimated pricing — per complete piece, all cushions included, made to order. Final quote confirmed at checkout; welt cord and ties available as add-ons. Covers close with a sewn envelope closure (no zippers on our line).
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — on the loveseat, measure the seat deck edge to edge to confirm the one-piece 47.5" pad, and check the chaise back height against the frame before ordering the 32" back.
Get your Middletown cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
Is the Middletown loveseat seat really one piece?
Yes — a single 47.5" × 25" × 5.5" pad with two separate 24" backs over it. If your frame has two separate seat wells, measure them and order per well.
Why is the chaise back so tall?
The Middletown chaise back runs 32" deep — closer to a reading-chair back than a typical 26" chaise back. It’s the line’s signature; substituting a shorter back changes the recline angle.
Does the dining chair have a back cushion?
No — the published configuration is a seat-only pad (19.5" × 20" × 4"). The frame back does the work.
How much do Middletown replacement cushions cost?
Estimated pricing from $170 for the lounge chair to $333 for the loveseat (complete, all cushions) — cotton linen, tech fabric, and premium velvet tiers. Final quote confirmed before we cut.
How long do Middletown cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Middletown chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Middletown order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related Hampton Bay series
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
