Melbourne Replacement Cushions for Hampton Bay (2026 Exact-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Exact OEM measurements for every piece of the Hampton Bay Melbourne line — measured from OEM & supplier listings.
The Melbourne line at a glance
Melbourne is a slim-profile Hampton Bay line from Home Depot — every cushion runs 4 inches thick, a tighter cut than the 5" standard on most Hampton Bay deep seating. It’s also the one line we list with two published configurations: the loveseat appears in both 49-inch and 51-inch seat widths, and the ottoman in two sizes suspected different production years. That’s not a typo — it’s why Melbourne owners should never order by guessing.
Measure your frame, match the row below, and we cut to your number — cotton linen, tech fabric, or premium velvet, made by the factory that ships them.
Melbourne cushion sizes — full chart
Exact-fit measurements for the full Melbourne line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Lounge Chair | Seat | 1 | 24 × 25 × 4 |
| Lounge Chair | Back | 1 | 24 × 21.5 × 4 |
| Loveseat | Seat | 1 | 49 × 25 × 4 (one-piece pad) 49" version under re-verification |
| Loveseat | Back | 2 | 24 × 21.5 × 4 (two separate cushions, each 24" wide) |
| Loveseat | Seat | 1 | 51 × 25 × 4 (one-piece pad) 51" version under re-verification |
| Loveseat | Ottoman | 1 | 19 × 16 × 4 loveseat-set version under re-verification |
| Ottoman | Ottoman | 1 | 21 × 19 × 4 two sizes listed |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Melbourne? See how to measure your cushions and match the numbers.
Is your set really Melbourne?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure across the seat deck: 49" or 51". Our full measuring guide walks you through it.
Fabric options & estimated pricing
Same exact-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
| Piece (complete set) | Cotton Linen | Tech Fabric | Premium Velvet |
|---|---|---|---|
| Ottoman (19" × 16" version) | $74 | $76 | $79 |
| Ottoman (21" × 19" version) | $85 | $88 | $91 |
| Lounge Chair (seat + back) | $167 | $176 | $185 |
| Loveseat, 49" version (1 seat + 2 backs) | $299 | $316 | $334 |
| Loveseat, 51" version (1 seat + 2 backs) | $305 | $322 | $341 |
Estimated pricing — per complete piece, all cushions included, made to order. Final quote confirmed at checkout; welt cord and ties available as add-ons. Covers close with a sewn envelope closure (no zippers on our line).
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — on Melbourne it is not optional: measure the loveseat seat deck edge to edge to learn whether yours is the 49" or 51" version, and measure the ottoman top before choosing between the two sizes.
Get your Melbourne cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
There are two Melbourne loveseat sizes — which is mine?
Published specs list both a 49" and a 51" seat width. Measure across the seat deck, edge to edge; the 2" difference is why guessing fails. Both use the same two 24"-wide backs.
Which ottoman goes with my set?
Two versions exist: 19" × 16" and 21" × 19", both 4" thick. Measure the top of your ottoman frame before ordering — and note the 19" × 16" version is listed under the loveseat set, not the standalone ottoman.
Are Melbourne cushions thinner than other Hampton Bay lines?
Yes — a uniform 4" profile on every piece, slimmer than 5"-thick series like Spring Haven or Santa Rosa. Don’t substitute a thicker pad; the frame proportions depend on it.
How much do Melbourne replacement cushions cost?
Estimated pricing from $74 for the 19-inch ottoman to $341 for the 51-inch loveseat (complete, all cushions) — cotton linen, tech fabric, and premium velvet tiers. Final quote confirmed before we cut.
How long do Melbourne cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Melbourne chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Melbourne order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related Hampton Bay series
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
