Kampar Replacement Cushions for Hampton Bay (2026 Custom-Fit Guide)
Rebuild swatches — every series chart cuts in any of the 119 fabrics.
Collected reference measurements for every piece of the Hampton Bay Kampar line — measured from OEM & supplier listings.
The Kampar line at a glance
Kampar — often listed as Kampar Belle Isle at Home Depot — is one of the roomiest Hampton Bay conversation lines: a lounge chair, a loveseat and sofa built on 22.5"-wide seats, plus a dining chair and ottoman on slimmer 3-inch pads. Its showpiece is the chaise: at 31 inches wide and 50 inches long, it is the widest chaise seat in the Hampton Bay range, and nothing off the shelf comes close to it.
We cut every Kampar piece to the original factory dimensions below — including the one-piece 45" loveseat pads this line uses instead of split seats — in cotton linen, tech fabric, or premium velvet, made by the factory that ships them.
Kampar cushion sizes — full chart
Custom-fit measurements for the full Kampar line. Width × depth × thickness, in inches. dims pending Home Depot cross-check
| Piece | Part | Qty | Width × Depth × Thickness (in.) |
|---|---|---|---|
| Lounge Chair | Seat | 1 | 22.5 × 25 × 5 |
| Lounge Chair | Back | 1 | 22.5 × 22 × 5 |
| Loveseat | Seat | 1 | 45 × 25 × 5 (one-piece pad) |
| Loveseat | Back | 1 | 45 × 22 × 5 (one-piece pad) |
| Sofa | Seat | 3 | 22.5 × 25 × 5 (three separate cushions, each 22.5" wide) |
| Sofa | Back | 3 | 22.5 × 23 × 5 (three separate cushions, each 22.5" wide) |
| Chaise Lounge | Seat | 1 | 31 × 50 × 5 |
| Chaise Lounge | Back | 1 | 31 × 28 × 5 |
| Dining Chair | Seat + back (one-piece) | 1 | 22 × 22 × 3 |
| Ottoman | Ottoman | 1 | 19 × 19.5 × 3 |
Don’t see your piece? Send us a photo and your measurements — we make custom cushions for every Hampton Bay frame. Not sure it’s Kampar? See how to measure your cushions and match the numbers.
Is your set really Kampar?
Check three things: (1) the white label under the seat frame or inside the arm — Hampton Bay model numbers usually start with a supplier code like GLD or THD; (2) your Home Depot order history or the original manual; (3) a tape measure — the 31"-wide chaise is the widest in the Hampton Bay range — if yours measures 31" across the seat, it’s a Kampar. Our full measuring guide walks you through it.
Fabric options
Same custom-fit dimensions, three fabric tiers. Cotton linen is the durable everyday pick; tech fabric is water-resistant and wipes clean; premium velvet delivers the high-end look and stands up to cat claws.
Comparing fabrics? See the fabric options in the custom order flow — same dimensions, any tier.
Measure before you order
Before you order, spend three minutes with our measuring guide — especially on the chaise: at 31" wide, measure across the seat deck at the widest point, and confirm the 50" length from the back hinge to the footrest edge.
Get your Kampar cushions
Not sure about a size? Upload a photo and we’ll confirm the fit before we cut. Not this series? Find your shape and order custom.
Frequently asked questions
What makes the Kampar chaise different from other Hampton Bay chaises?
Its width: 31 inches, against 22"–26" on most lines. Length is a full 50" with a 31" × 28" back. If your chaise seat measures 31" across, generic chaise pads will be nowhere near wide enough.
Is the Kampar loveseat cushion one piece or two?
One — a single 45"-wide seat pad with a single 45"-wide back. Don’t order two 22.5" seats for it; the frame takes the full-width pieces.
Are the dining chair cushions really 3 inches thick?
Yes. Kampar dining chairs use a slim one-piece 22" × 22" × 3" pad — seat and back in a single wrapped unit, not separate cushions.
How much do Kampar replacement cushions cost?
Pricing comes from our instant quote tool — enter your piece count and dimensions for a factory-direct estimate in seconds.
How long do Kampar cushions take to make and ship?
Every set is cut and sewn after you order — typically 7–14 business days in production — typical custom shops quote 3–6 weeks — then flat-rate shipping to your door. Rush production (4–7 business days) is available for most fabrics.
Can I send a photo of my furniture instead of measuring?
Yes. Upload a photo of your set (and the old cushions if you still have them) with your quote request, and our team will cross-check your numbers against the Kampar chart above before we cut anything.
Why order from us
- Factory-direct. We are the outdoor cushion factory — we cut, fill and sew every Kampar order ourselves. No middleman, no dropship.
- 10+ years making cushions. Deep-seating replacements are a daily product for us, not a side catalog.
- 35–65D density foam. Seats filled with firm, high-resilience foam that keeps its front edge — softer than pancaked originals, built for seasons.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against this chart before cutting — a finished piece outside tolerance is remade free.
Related Hampton Bay series
- Oak Cliff — 5 piece types incl. a 24.5" chaise
- Verrado — chaise, club chair, dining and ottoman
- Spring Haven — 7"-thick backs and a 50" chaise
From the guides: Hampton Bay replacement cushions buyer’s guide · How to find your Hampton Bay model number
