EKTORP Replacement Cushions for IKEA — Measured Fit (2026)
Cushions to fit IKEA EKTORP: Indoor sofas — discontinued ~2024 — official measurements, cut to order.
The EKTORP line at a glance
IKEA discontinued EKTORP in the US around 2024, ending one of the highest-volume sofa lines of the previous two decades. The official pages went dark – but EKTORP’s loose-cover construction meant a cover-maker aftermarket (Bemz, Soferia and peers) had patterned every piece to the original factory dimensions, and their spec tables survive the retirement. That is where this chart comes from: the full geometry of every EKTORP piece, still documented.
Covers only fix covers. When the foam dies, the replacement is a rebuild – new cores cut to the original seat geometry (aftermarket rebuilds run ~4-inch high-resilience foam for seats) plus covers, in any fabric. EKTORP is the best-documented discontinuation in furniture, which makes it the easiest retired line to rebuild.
EKTORP cushion sizes — full chart
Measurements compiled from official IKEA product data (live pages, archived official values, or surviving aftermarket spec tables). Inches; metric-derived fractions (22 7/8, 23 5/8) are normal — cut to the fraction, not the rounded inch.
| Piece | Part | Qty | W × D (× H) in. | Notes |
|---|---|---|---|---|
| Armchair | Frame overall W x D x H | 1 | 40 7/8 × 34 5/8 × 34 5/8 seat H | series seat depth 22 7/8 |
| Sofa 2-seat | Frame overall | 1 | 70 1/2 × 34 5/8 × 34 5/8 seat H | |
| Sofa 3-seat | Frame overall | 1 | 85 3/4 × 34 5/8 × 34 5/8 seat H | |
| Sofa bed 2-seat | Frame overall | 1 | 78 × 37 3/8 × 34 5/8 seat H | |
| Sofa bed 3-seat | Frame overall | 1 | 85 3/4 × 34 5/8 × 34 5/8 seat H | |
| Footstool | Frame overall | 1 | 32 1/4 × 24 3/8 × 17 1/4 seat H | |
| Chaise (free-standing) | Frame overall | 1 | 28 1/4 × 64 1/4 × 34 5/8 seat H | |
| Corner sofa 2+2 | Frame overall | 1 | 95 3/4 × 95 3/4 × 34 5/8 seat H | |
| Sofa with chaise 2-seat | Frame overall | 1 | 99 1/4 × 34 5/8 seat H | |
| JENNYLUND armchair | Frame overall | 1 | 30 3/4 × 33 1/2 × 33 1/8 seat H | |
| TULLSTA armchair | Frame overall | 1 | 31 1/2 × 27 5/8 × 30 1/4 seat H | |
| Seat rebuild reference | Seat core | 1 | — | aftermarket ~4 in. loft (10 cm HR foam) |
Is your set really EKTORP?
EKTORP is easy to confirm: rounded arms, loose washable covers, and usually a cover-maker’s label under the seat from a previous owner. Your frame label or order history resolves the piece; against this chart, width is the giveaway (2-seat 70 1/2 vs 3-seat 85 7/8 overall). Full method: our three-step measuring guide.
Fabric options & estimated pricing
Same fit, three fabric tiers — cotton linen (durable everyday), tech fabric (water-resistant, wipes clean), premium velvet (the high-end look that stands up to cat claws). Indoor rebuilds: 45–60D high-resilience cores, thickness chosen to restore the published seat height.
| Piece | Cotton Linen | Tech Fabric | Premium Velvet |
|---|---|---|---|
| Armchair seat rebuild (~24 x 22 7/8 core) | $105 | $109 | $114 |
| Sofa 2-seat bench run (70 1/2 x 22 7/8) | $234 | $246 | $259 |
| Footstool (32 1/4 x 24 3/8) | $134 | $140 | $146 |
Estimated pricing — $39 make-base + area at per-sq-ft rates, made to order. Final quote confirmed at checkout; welt cord and ties available as add-ons. Covers close with a sewn envelope closure (no zippers on our line).
Measure before you order
Three minutes with a tape measure prevents the classic IKEA mistake — ordering rounded inch sizes for metric fractions. Measure seam to seam, every distinct block, to the nearest quarter inch per our measuring guide; your numbers are cross-checked against the chart above before anything is cut.
Frequently asked questions
My IKEA EKTORP is 15 years old - are replacement cushions still available?
Yes. The full EKTORP geometry survives via cover-maker spec tables (the chart above), and rebuilds – new foam plus covers – are quoted piece by piece, cut to those dimensions. Measure once, order any piece.
Where do these EKTORP dimensions come from if IKEA retired the line?
From the cover-maker aftermarket: EKTORP’s loose-cover construction meant brands like Bemz and Soferia patterned every piece to the factory’s original dimensions, and their spec tables outlived IKEA’s own product pages.
Are EKTORP and UPPLAND cushions the same?
Not identical. UPPLAND inherited EKTORP’s design language and its 22 7/8-inch seat depth, but the frames and covers are their own. Check your piece against both charts before ordering.
What thickness foam do EKTORP seat replacements use?
Around 4 inches of loft – documented rebuilds run 10 cm high-resilience foam with a soft wrap. The overall frame height (34 5/8) is the check: choose thickness to restore the original seat height.
Why order from us
- Factory-direct. We are the cushion factory — we cut, fill and sew every order ourselves. No middleman, no dropship.
- 10+ years making cushions. Measured replacements are a daily product for us, not a side catalog.
- 45–60D density foam options. Seats filled with firm, high-resilience foam that keeps its front edge — an upgrade over catalog-grade fill.
- Made to order, no minimums. Any piece, any fabric tier, one cushion or the full set.
- Cut to ± ½ inch, in writing. Your numbers are cross-checked against the chart above before cutting — a finished piece outside tolerance is remade free.
