Custom Bar Stool Cushions, Made to Your Measurements
Factory-direct, cut to your measurements — rounds, squares, saddles, sets of any size.
Bar stools are the most-used seats in many homes — every morning coffee, every homework session, every party — and among the last to get replacement cushions, because the old ones are small, cheap-looking and easy to defer. Then one dishes past comfort and the whole set looks tired together.
The stock aisle runs rectangles and squares; the round decks most stools actually have live in craft marketplaces and custom shops. We cut rounds, ovals, radiused squares and trapezoid saddles to your numbers — per-stool measurements in one order, one fabric run for the whole set, and mounting that works on swivels.
Build Your Bar Stool Cushion
Build your bar stool cushion — start with the shape below.
Enter the diameter (measured twice, across two axes), thickness, and tie or anti-slip options — then pick your fabric tier and see an instant estimate.
Need a different shape? Start from all 11 shapes →
Pricing — estimated starting at
| Fabric tier | Estimated price* |
|---|---|
| Cotton Linen | $54 |
| Tech Fabric | $55 |
| Premium Velvet | $56 |
*One round seat (14" diameter × 2 in.): $39 make-base + area × rate ($14.02/$15.13/$16.26 per sq ft, 2" 50D foam + fabric; every shape prices on its bounding rectangle). Sets of 2–6 are multiples — order per-stool numbers in one run so the dye lots match.
For comparison: U.S. custom-configurator specialists’ 2026 listings quote bar stool builds from around $128 at entry — and most only reveal that price after a quote request. We publish the formula above so you can check the math before you order.
Popular Bar Stool Sizes We Cut
Typical bar stool seat sizes (typical, always measure):
| Piece | Typical size | Notes |
|---|---|---|
| Round seat cushion | 13–16" diameter | The most common bar stool form |
| Square seat cushion | 14 × 14 to 16 × 16 | Breakfast-bar and counter staples — stock squares: 15 × 15, 16 × 16, 17 × 17 |
| Rectangular saddle cushion | ~16 × 12 to 18 × 13 | Saddle-style stools; measure both widths — often a trapezoid cut |
| Seat thickness | 2 to 3 inches | 2 for tight footrest clearance, 3 for comfort |
| Counter vs bar height | Seat at 24–27" vs 28–32" | Changes the stool, not the cushion — size comes from the deck, so ignore the height word when sizing |
Yours differs? That’s the point — we cut to your numbers.
How to Measure a Bar Stool Cushion
- Measure the deck, not the dished cushion — a worn stool cushion has a body-shaped valley in it; pull it and measure the hard deck underneath, edge to edge, to the nearest quarter inch.
- Rounds: measure the diameter twice, across two different axes. Decks that look round are often slightly oval from years of swivel wear; more than half an inch apart means order an oval.
- Squares: check the corners — radiused corners over about an inch need the radius on the order; a sharp-cornered cushion will overhang.
- Saddles: front width, back width, depth — a flat rectangle on a curved saddle rocks at the edges; a trapezoid cut matches.
Full walkthrough with photos: our measuring guide.
Build details — sewing style and fastening options confirmed with your dimensions before cutting.
Fabric: Kitchen, Bar and Poolside
On stools the mounting is half the product: stationary stools take corner ties (four outlast two); swivel stools want an anti-slip underside, or ties that fasten to the rotating deck itself so cushion and stool spin as one. For fabric, match the room: tech fabric is waterproof and wipes clean after the wine incident; cotton linen is the natural weave for low-spill houses; premium velvet holds up to claws in formal rooms. Poolside and tiki bars want the full outdoor treatment — see the fabric guide.
Seven of the 119 fabrics in the swatch library — free samples ship with every quote.
Counter, Bar, and Everything Between
- The kitchen island is the daily-duty end of the category: every breakfast, every homework session, every party guest. Counter-height stools (seat 24–27 inches) take 13–15 inch pads at 2 inches thick where the counter lip is tight; Tech Fabric pays for itself by the second juice incident; swivel stools get anti-slip undersides or deck-fastened ties.
- The proper bar (seat 28–32 inches) runs taller stools with the same decks — 14–16 inch rounds and squares — and usually fewer hours per sit, which is why 35D foam is honest here. Backless stools want four corner ties or a full anti-slip underside; nothing on a bar stool gets fastened to the base.
- Poolside and tiki bars are outdoor duty in stool geometry: full weatherproof fabric, foam-core fill that drains and dries, and stainless-safe ties that shrug splash. The build logic is the outdoor cushions page’s — only the footprint is round.
Frequently asked questions
Can I order standard bar stool cushion sizes?
Standard sizes too — in 3 clicks: rounds run 13–16 inches across most stools, squares 14–16 — stock squares like 15 × 15 and 16 × 16 are common fits. Type the standard numbers into the customizer for the same instant factory-direct quote — your size is never out of stock.
What size cushion fits a standard bar stool?
A 13–16 inch round or 14–16 inch square covers the great majority — measure your deck edge-to-edge to the nearest quarter inch rather than trusting "standard," because stool decks vary more than any other seat class.
How do I keep cushions on swivel bar stools?
Skip ties to the base entirely — they twist and snap — and use either an anti-slip underside or ties that fasten to the rotating seat deck itself, so cushion and stool spin as one unit.
How thick should a bar stool cushion be?
Two inches where the counter-to-footrest distance is tight, three for comfort where there is room — every inch of cushion lifts knees toward the counter edge, and stools hang lower than people think.
Can I replace just one cushion in a set?
You can, but expect the new cushion to sit slightly proud (new foam has full loft) and possibly off-color (dye lots drift between batches). If more than one is dished, the set is telling you something.
Is there a size difference between counter and bar stool cushions?
Usually none in the pad itself — both run 13–16 inch decks — the difference is stool height (24–27 inch seats at counter, 28–32 at bar), which changes the stool, not the cushion. Size always comes from the deck measurement; ignore the height word when ordering.
How do I attach a cushion to a backless stool?
Four corner ties to the deck frame where gaps allow, or an anti-slip underside on a solid deck — and for swivel stools, ties fastened to the rotating deck itself so cushion and stool spin as one. Nothing attaches to the stool base or the floor; every fastening point moves with the seat.
Made by the factory that ships them
- Outdoor cushion factory for 10+ years — we cut, fill, and sew every order ourselves.
- Every dimension you send is re-checked before a single yard of fabric is cut.
- Made-to-order means any fabric, any piece, no minimum.
- Cut to ± ½ inch of your confirmed dimensions, in writing — outside tolerance, remade free.
Related categories
- Adirondack Chair Cushions — outdoor chair sets with custom tie placement
- Deep Seat Cushions — 5–6 inch builds for lounging frames
Further reading from the blog
- Bar stool cushions: the complete guide — sizes, ties, swivel mounting and set rules — the article behind this page
- How to measure a round cushion — diameter is not enough — the two-axis method
- Dining chair cushion replacement — the dining-height cousin of everything here
